Abstract:We report an energy-efficient biogas reforming process with high and stable methane conversions by O-2 presence. During this biogas reforming process, the effects of various O-2 concentrations in biogas on initial conversions and stability at various temperatures on a Ni/SiO2 catalyst were detailed investigated. In addition, theoretical energy consumption and conversions were calculated based on the Gibbs energy minimization method to compare with experimental results. Carbon formation and sintering during the reforming process were characterized by thermal gravity analysis, the Brunauer-Emmett-Teller method, X-ray diffraction, and high-resolution transmission electron microscopy to investigate the feasibility of applying this process to an inexpensive nickel catalyst. The results showed that 5% O-2 in biogas improved the CH4 conversion and stability of biogas reforming. The enhancement of stability was attributed to the inhibited sintering, our first finding, and the reduced carbon deposition at the same time, which sustained a stable conversion of CH4, and proved the applicability of base Ni catalyst to this process. Higher O-2 concentrations (>= 10%) in biogas resulted in severe decrease in CO2 conversion and greater H2O productivity. Our proposed biogas reforming process, with a high and stable conversion of CH4, reduced energy input, and the applicability to inexpensive base metal catalyst, offers a good choice for biogas reforming with low O-2 concentrations (<= 5%) to produce syngas with high energy efficiency. (C) 2016 Elsevier Ltd. All rights reserved.

Study of Autothermal Reforming of CH4 with CO2 and O2 to Produce Syngas--comparison of Effect of Fluidized Bed and Fixed Bed Reactor

Comparative Study Between Fluidized Bed and Fixed Bed Reactors in Methane Reforming with CO2 and O2 to Produce Syngas

Study on Reforming of CH4 and C3H8 with CO2 and O2 to Syngas in a Fluidized Bed Reactor

Autothermal Reforming of CH4 and C3H8 to Syngas in a Fluidized-Bed Reactor

Reforming of Ch4 with Co2 and O-2 to Produce Syngas over Cao Modified Ni/Sio2 Catalysts in A Fluidized Bed Reactor

Reforming of CH 4 with CO 2 and O 2 to produce syngas over CaO modified Ni/SiO 2 catalysts in a fluidized bed reactor

Syngas Production from Reforming of Methane with Co2 and O-2 over Ni/Sro-Sio2 Catalysts in A Fluidized Bed Reactor

Catalytic Performance of Ni/SiO2 in Converting Methane to Syngas Using Fluidized Bed Reactor

Catalytic Performance of Ni/CaO-SiO2 for Converting Methane to Syngas in A Fluidized Bed Reactor

Combination of CO 2 reforming and partial oxidation of CH 4 over Ni/Al 2 O 3 catalysts using fluidized bed reactor

Catalytic conversion of methane and CO2 to synthesis gas over a La2O3-modified SiO2 supported Ni catalyst in fluidized-bed reactor

Combination of CO2 Reforming and Partial Oxidation of Methane over Ni/BaO-SiO2 Catalysts to Produce Low H2/CO Ratio Syngas Using a Fluidized Bed Reactor

Production of Syngas Via Autothermal Reforming of Methane in a Fluidized-Bed Reactor over the Combined CeO2–ZrO2/SiO2 Supported Ni Catalysts

Syngas Production Via Combined Oxy-Co2 Reforming of Methane over Gd2O3-modified Ni/SiO2 Catalysts in a Fluidized-Bed Reactor

Fabrication of CeZrO2 on Ni/SiO2 and Promoted Catalysis for Methane Autothermal Reforming in a Fluidized Bed Reactor

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub>Catalysts in a Fluidized-Bed Reactor

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La2O3/SiO2 Catalysts in a Fluidized-Bed Reactor

Effect of Al_2O_3 on the Ni-Al_2O_3/SiO_2 Catalysts for the Production of Syngas from Reforming of CH_4 with CO_2 and O_2

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation

Energy-efficient Biogas Reforming Process to Produce Syngas: the Enhanced Methane Conversion by O2

Tri-reforming of methane to syngas over Ni/Al2O3 — Thermal distribution in the catalyst bed