Abstract:Ni-based catalysts supported on Al2O3–ZrO2 (Ni/Al2O3–ZrO2) were prepared by a direct sol–gel process with citric acid as the gelling agent. The evaluation of the catalyst prepared for methane reforming with CO2 was carried out with thermal gravimetric analysis (TGA), infrared spectroscopy (IR), X-ray diffraction (XRD), microscopy analyses (SEM and TEM), temperature-programmed reduction (TPR) and in a micro-reactor system. The catalytic performance for CO2 reforming of methane to synthesis gas in a continuous-flow micro-reactor under atmospheric pressure was investigated. TGA, IR, XRD and microscopy analyses show that the Ni particles have a nanostructure of around 5nm and are uniformly dispersed on the Al2O3–ZrO2 support, which exists as an amorphous phase. Catalytic tests using CO2 reforming of methane to synthesis gas show that the catalytic activity increases with increasing metal loading, and the 20Ni/Al2O3–ZrO2 (0.2 Ni/Al molar ratio) catalyst has excellent activity and stability, compared with that of the Al2O3 supported Ni catalyst, with 91.9% conversion of CO2 and 82.9% conversion of CH4 over 50h at 1073K, atmospheric pressure, hourly space velocity of 11,200mlgcat-1h-1 and CH4:CO2:N2 of 2:2:1. The excellent catalytic activity and stability is attributed to the very highly and uniformly dispersed small metallic Ni particles, the reducibility of the Ni oxides and an interaction between metallic Ni particles and the support Al2O3–ZrO2.

Reforming of CH4with CO2and O2to Produce Syngas over CaO Modified Ni/SiO2catalysts in a Fluidized Bed Reactor

Reforming of CH 4 with CO 2 and O 2 to produce syngas over CaO modified Ni/SiO 2 catalysts in a fluidized bed reactor

Catalytic Performance of Ni/CaO-SiO2 for Converting Methane to Syngas in A Fluidized Bed Reactor

Syngas Production from Reforming of Methane with Co2 and O-2 over Ni/Sro-Sio2 Catalysts in A Fluidized Bed Reactor

Combination of CO2 Reforming and Partial Oxidation of Methane over Ni/BaO-SiO2 Catalysts to Produce Low H2/CO Ratio Syngas Using a Fluidized Bed Reactor

Catalytic conversion of methane and CO2 to synthesis gas over a La2O3-modified SiO2 supported Ni catalyst in fluidized-bed reactor

Combined Catalytic Partial Oxidation and CO2 Reforming of Methane over ZrO2-modified Ni/SiO2 Catalysts Using Fluidized-Bed Reactor

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La2O3/SiO2 Catalysts in a Fluidized-Bed Reactor

Comparative Study Between Fluidized Bed and Fixed Bed Reactors in Methane Reforming with CO2 and O2 to Produce Syngas

Study on Reforming of CH4 and C3H8 with CO2 and O2 to Syngas in a Fluidized Bed Reactor

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub>Catalysts in a Fluidized-Bed Reactor

Catalytic Performance of Ni/SiO2 in Converting Methane to Syngas Using Fluidized Bed Reactor

Syngas Production Via Combined Oxy-Co2 Reforming of Methane over Gd2O3-modified Ni/SiO2 Catalysts in a Fluidized-Bed Reactor

Study of Autothermal Reforming of CH4 with CO2 and O2 to Produce Syngas--comparison of Effect of Fluidized Bed and Fixed Bed Reactor

CO2 Reforming with Methane Reaction over Ni@SiO2 Catalysts Coupled by Size Effect and Metal-Support Interaction

Combination of CO 2 reforming and partial oxidation of CH 4 over Ni/Al 2 O 3 catalysts using fluidized bed reactor

Carbon Dioxide Reforming of Methane over Ni Supported SiO2: Influence of the Preparation Method on the Resulting Structural Properties and Catalytic Activity

Autothermal Reforming of CH4 and C3H8 to Syngas in a Fluidized-Bed Reactor

High-performance Nano-Structured Ni Based Catalysts for High-Temperature CO2CH4 Reforming—greenhouse Gases to Syngas

Carbon deposition on catalyst during partial oxidation and reforming of CH4/C3H8 with CO2 to syngas

Study on CO2 reforming of methane to syngas over Al 2O3-ZrO2 supported Ni catalysts prepared via a direct sol-gel process