Abstract:We evaluated dry reforming of methane in a tubular fixed-bed reactor at various reaction temperatures from 923 to 973 K using different reactant compositions over 10 % Ni/Al2O3 catalyst prepared by a wet impregnation method. Both NiO and NiAl2O4 phases were formed on the catalyst surface during calcination, and the 10 % Ni/Al2O3 catalyst possessed high surface area of 106.36 m2 g−1 with fine metal dispersion. The low activation energy observed for formation of NiAl2O4 phase during calcination indicated strong interaction between the NiO form and the γ-Al2O3 support. The NiO phase was completely reduced to metallic Ni0 form via H2 reduction. The conversions of CO2 and CH4 increased noticeably with increasing CO2 partial pressure, and the H2/CO ratio was always below unity, regardless of reaction conditions. The yield of H2 was enhanced with growing CO2 partial pressure, approaching a highest value of about 70 %. The heterogeneous nature of the deposited carbon was evident from the coexistence of carbon nanofibers and graphitic carbon. In addition, the amount of filamentous carbon appeared to be slightly less than that of graphitic carbon. However, these deposited carbons were completely removed by O2 at below 900 K during temperature-programmed oxidation.

Autothermal Reforming of CH4 and C3H8 to Syngas in a Fluidized-Bed Reactor

Study of Autothermal Reforming of CH4 with CO2 and O2 to Produce Syngas--comparison of Effect of Fluidized Bed and Fixed Bed Reactor

Study on Reforming of CH4 and C3H8 with CO2 and O2 to Syngas in a Fluidized Bed Reactor

Reforming of Ch4 with Co2 and O-2 to Produce Syngas over Cao Modified Ni/Sio2 Catalysts in A Fluidized Bed Reactor

Catalytic conversion of methane and CO2 to synthesis gas over a La2O3-modified SiO2 supported Ni catalyst in fluidized-bed reactor

Catalytic Performance of Ni/SiO2 in Converting Methane to Syngas Using Fluidized Bed Reactor

Reforming of CH 4 with CO 2 and O 2 to produce syngas over CaO modified Ni/SiO 2 catalysts in a fluidized bed reactor

Catalytic Performance of Ni/CaO-SiO2 for Converting Methane to Syngas in A Fluidized Bed Reactor

Autothermal Reforming and Partial Oxidation of Methane in Fluidized Reactor over Highly Dispersed Ni Catalyst Prepared from Ni Complex

Combination of CO 2 reforming and partial oxidation of CH 4 over Ni/Al 2 O 3 catalysts using fluidized bed reactor

Syngas Production from Reforming of Methane with Co2 and O-2 over Ni/Sro-Sio2 Catalysts in A Fluidized Bed Reactor

Comparative Study Between Fluidized Bed and Fixed Bed Reactors in Methane Reforming with CO2 and O2 to Produce Syngas

Combination of CO2 Reforming and Partial Oxidation of Methane over Ni/BaO-SiO2 Catalysts to Produce Low H2/CO Ratio Syngas Using a Fluidized Bed Reactor

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub>Catalysts in a Fluidized-Bed Reactor

Syngas production from methane dry reforming over Ni/Al2O3 catalyst

Deactivation of Ni Catalysts During Methane Autothermal Reforming with CO2 and O2 in a Fluidized-Bed Reactor

Combined Catalytic Partial Oxidation and CO2 Reforming of Methane over ZrO2-modified Ni/SiO2 Catalysts Using Fluidized-Bed Reactor

Production of Syngas Via Autothermal Reforming of Methane in a Fluidized-Bed Reactor over the Combined CeO2–ZrO2/SiO2 Supported Ni Catalysts

Syngas Production Via Combined Oxy-Co2 Reforming of Methane over Gd2O3-modified Ni/SiO2 Catalysts in a Fluidized-Bed Reactor

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La2O3/SiO2 Catalysts in a Fluidized-Bed Reactor

Fabrication of CeZrO2 on Ni/SiO2 and Promoted Catalysis for Methane Autothermal Reforming in a Fluidized Bed Reactor