Abstract:Methane dry reforming, co-converting greenhouse gases CH4 and CO2 into chemically active syngas (H2/CO), affords a promising route for producing chemicals and fuels from carbon resources. Ni catalysts are the most active for this reaction but suffer from the dilemma of rapid deactivation caused by metal sintering at higher temperatures (>973 K) or coke accumulation at relatively lower temperatures (673–973 K). Here, we report a catalyst configuration—Ni particles (15 nm) confined by a 1–2 nm-thick multielement-oxide (MEO) layer—allows a stable operation at 873–1073 K with a stoichiometric CH4/CO2 ratio of 1.0, that is, the severe conditions for catalyst deactivation but of industrial interest for process efficiency and atomic economy. The in situ-evolved MEO layer resembles the property of high-entropy oxide, which stabilizes the Ni particles with appropriate size and high-index facets, even at 1173 K. Meanwhile, in situ TEM under near atmospheric pressure combining intelligent gravity analysis (IGA)-mass spectrometry (MS) characterizations prove that this unique structure balanced the activation of CH4 and CO2. Thus, the lifetime of the catalyst has been efficiently prolonged with nearly coke-free operations, even at 873 K, the most severe coking temperature. This high-entropy design and stabilization effect offers a facile strategy to precisely fabricate active and robust metal catalysts with wide operation temperatures for many challenging reactions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02995.Structural characterizations, in situ experiments, and the comparison of catalytic performances under MDR reactions conditions of OxNi and the reference Ni catalysts (PDF)In situ TEM observations for the OxNi catalyst carried out over ARM 300F using an insitu sample holder (MP4)In situ TEM observations for the OxNi catalyst carried out at 1173 K with the pressure of 760 mbar (MP4)In situ TEM observations for the reference Ni catalyst carried out at 1173 K with the pressure of 760 mbar in a CH4 atmosphere (MP4)This article has not yet been cited by other publications.

Deactivation of Ni Catalysts During Methane Autothermal Reforming with CO2 and O2 in a Fluidized-Bed Reactor

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Combined Catalytic Partial Oxidation and CO2 Reforming of Methane over ZrO2-modified Ni/SiO2 Catalysts Using Fluidized-Bed Reactor

Ni/SiO2 Catalyst Prepared with Nickel Nitrate Precursor for Combination of CO2 Reforming and Partial Oxidation of Methane: Characterization and Deactivation Mechanism Investigation

Syngas Production from Reforming of Methane with Co2 and O-2 over Ni/Sro-Sio2 Catalysts in A Fluidized Bed Reactor

Performance of Ni/MgO–AN Catalyst in High Pressure CO 2 Reforming of Methane

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Durable Ni/Mgo Catalysts For Co2 Reforming Of Methane: Activity And Metal-Support Interaction

Catalytic conversion of methane and CO2 to synthesis gas over a La2O3-modified SiO2 supported Ni catalyst in fluidized-bed reactor

Ni/SiO<sub>2</sub>Catalyst Prepared with Nickel Nitrate Precursor for Combination of CO<sub>2</sub>Reforming and Partial Oxidation of Methane: Characterization and Deactivation Mechanism Investigation

Combination of CO2 Reforming and Partial Oxidation of Methane over Ni/BaO-SiO2 Catalysts to Produce Low H2/CO Ratio Syngas Using a Fluidized Bed Reactor

Methane Autothermal Reforming with CO2 and O2 to Synthesis Gas at the Boundary Between Ni and ZrO2

Catalytic Performance of Ni/SiO2 in Converting Methane to Syngas Using Fluidized Bed Reactor

Reforming of Ch4 with Co2 and O-2 to Produce Syngas over Cao Modified Ni/Sio2 Catalysts in A Fluidized Bed Reactor

Effect of Formation of NiO-MgO Solid Solution on Activity and Stability of Ni/MgO-AN for CO2 Reforming of Methane

Autothermal Reforming and Partial Oxidation of Methane in Fluidized Reactor over Highly Dispersed Ni Catalyst Prepared from Ni Complex

Revealing the Effect of Nickel Particle Size on Carbon Formation Type in the Methane Decomposition Reaction

Study on CO2 reforming of methane to syngas over Al 2O3-ZrO2 supported Ni catalysts prepared via a direct sol-gel process

CO2 Reforming of CH4 over Ni Supported on Nano-ZrO2( I ) - Comparison with Conventional Oxide Supported Nickel

Partial Oxidation Of Methane To Syngas Over Ni-Based Catalysts

Synergy of Oxygen Vacancies and Ni 0 Species to Promote the Stability of a Ni/ZrO 2 Catalyst for Dry Reforming of Methane at Low Temperatures