Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> BACKGROUND</h3>CO2 reforming of methane, also known as dry reforming of methane, has received significant attention because this technology can convert notorious greenhouse gases (CH4/CO2) into useful syngas (H2/CO). However, this technology still hasn't been commercialized, primarily due to the lack of feasible catalysts. </section><section class="article-section__content"><h3 class="article-section__sub-title section1"> RESULTS</h3>Based on zirconia (ZrO2) nanoparticles with pure monoclinic (m) or tetragonal (t) crystal phase, three nickel (Ni) catalysts (Ni/m‐ZrO2, Ni/t‐ZrO2 and Ni/m‐ZrO2@Al2O3) have been synthesized for CO2 reforming of methane. The Ni/t‐ZrO2 catalyst exhibited lowest reforming activity with CH4 conversion of 15.5% at 700 °C under 1 atm with a gas hourly space velocity (GHSV) of 96 000 mL/(h gcat). The Ni/m‐ZrO2 catalyst showed much higher initial activity but underwent severe deactivation, over which CH4 conversion decreased from 56.1% to 33.4% after 300 min of reaction. The nanocomposite Ni/m‐ZrO2@Al2O3 catalyst with confinement effect possessed the best activity and good stability. Specifically, its CH4 conversion decreased merely from 60.2% to 55.3% after 24 h of reaction. </section><section class="article-section__content"><h3 class="article-section__sub-title section1"> CONCLUSION</h3>Structural characterizations demonstrate that limited specific surface area and weak metal‐support interactions existed on the Ni/t‐ZrO2 catalyst, which led to large Ni nanoparticles and thus poor reforming activity. Both Ni/m‐ZrO2 and Ni/m‐ZrO2@Al2O3 catalysts had high specific surface area and tiny Ni nanoparticles, which may rationalize the high reforming activity. The improved stability on the Ni/m‐ZrO2@Al2O3 catalyst was mainly related to the alleviated carbon deposition endowed by enriched surface basicity and strengthened metal‐support interactions. This article is protected by copyright. All rights reserved.</section>

Tri-reforming of methane over Ni catalysts for CO2 conversion to Syngas with desired H2CO ratios using flue gas of power plants without CO2 separation

Tri-reforming of Methane to Synthesis Gas

Tri-reforming of methane over Ni/ZrO2 catalyst derived from Zr-MOF for the production of synthesis gas

Tri-reforming of CH 4 over a Thermally Stable and Carbon-Resistant Nanonickel Metal Catalyst Dispersed on Mesoporous-Zirconia

Trireforming Of Methane To Syngas Over Supported Carbide Catalysts

Nickel-based tri-reforming catalyst for the production of synthesis gas

Bi-reforming of Methane with Carbon Dioxide and Steam on Nickel-Supported Binary Mg–Al Metal Oxide Catalysts

Tri-reforming of methane to syngas over Ni/Al2O3 — Thermal distribution in the catalyst bed

Biomass Derived low concentration CO2 mixed Gas Combined Steam to Reform Methane through Ni based volcanic rock catalyst

High-performance Nano-Structured Ni Based Catalysts for High-Temperature CO2CH4 Reforming—greenhouse Gases to Syngas

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Tri‐reforming of methane over a hydroxyapatite supported nickel catalyst

Dually Confined Ni-based Catalysts by Ion-Exchange Inverse Loading for Dry Reforming of Methane

A nanoscale Ni/ ZrO 2 catalyst coated with Al 2 O 3 for carbon dioxide reforming of methane

Syngas production from methane dry reforming over Ni/Al2O3 catalyst

Progress in Ni-based catalysts for CH4-CO2 reforming reaction

Combination of CO2 Reforming and Partial Oxidation of Methane over Ni/BaO-SiO2 Catalysts to Produce Low H2/CO Ratio Syngas Using a Fluidized Bed Reactor

Syngas Production via Combined Steam and Carbon Dioxide Reforming of Methane over Ni-Ce<sub>X</sub>M<sub>1-X</sub>O<sub>2</sub> (M = Ti or Zr) Catalysts

Carbon Dioxide Reforming of Methane over Ni-based Catalyst

Reforming Of Methane And Coalbed Methane Over Nanocomposite Nni/Zro2.

Energy-efficient Biogas Reforming Process to Produce Syngas: the Enhanced Methane Conversion by O2