Abstract:Methane dry reforming, co-converting greenhouse gases CH4 and CO2 into chemically active syngas (H2/CO), affords a promising route for producing chemicals and fuels from carbon resources. Ni catalysts are the most active for this reaction but suffer from the dilemma of rapid deactivation caused by metal sintering at higher temperatures (>973 K) or coke accumulation at relatively lower temperatures (673–973 K). Here, we report a catalyst configuration—Ni particles (15 nm) confined by a 1–2 nm-thick multielement-oxide (MEO) layer—allows a stable operation at 873–1073 K with a stoichiometric CH4/CO2 ratio of 1.0, that is, the severe conditions for catalyst deactivation but of industrial interest for process efficiency and atomic economy. The in situ-evolved MEO layer resembles the property of high-entropy oxide, which stabilizes the Ni particles with appropriate size and high-index facets, even at 1173 K. Meanwhile, in situ TEM under near atmospheric pressure combining intelligent gravity analysis (IGA)-mass spectrometry (MS) characterizations prove that this unique structure balanced the activation of CH4 and CO2. Thus, the lifetime of the catalyst has been efficiently prolonged with nearly coke-free operations, even at 873 K, the most severe coking temperature. This high-entropy design and stabilization effect offers a facile strategy to precisely fabricate active and robust metal catalysts with wide operation temperatures for many challenging reactions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02995.Structural characterizations, in situ experiments, and the comparison of catalytic performances under MDR reactions conditions of OxNi and the reference Ni catalysts (PDF)In situ TEM observations for the OxNi catalyst carried out over ARM 300F using an insitu sample holder (MP4)In situ TEM observations for the OxNi catalyst carried out at 1173 K with the pressure of 760 mbar (MP4)In situ TEM observations for the reference Ni catalyst carried out at 1173 K with the pressure of 760 mbar in a CH4 atmosphere (MP4)This article has not yet been cited by other publications.

Enhanced Thermocatalytic Stability by Coupling Nickel Step Sites with Nitrogen Heteroatoms for Dry Reforming of Methane

Nickel‐Catalyzed Dry Reforming of Methane Via Modulating the Zirconia Shapes

Atypical Stability of Exsolved Ni-Fe Alloy Nanoparticles on Double Layered Perovskite for Co2 Dry Reforming of Methane

Ni/Ce0.9Eu0.1O1.95 with enhanced coke resistance for dry reforming of methane

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Controllable Preparation of Nano-Ni to Eliminate Step Edges of Carbon Deposition on Ni-Based Catalysts for Methane Dry Reforming

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Highly Stable Ni−B/Honeycomb−Structural Al2O3 Catalysts for Dry Reforming of Methane

Mechanistic and microkinetic insights into the stability and activity of Ni 3 In catalyst for dry methane reforming

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Tuning metal-support interactions in nickel-zeolite catalysts leads to enhanced stability during dry reforming of methane

Methane Dry Reforming by Ni-Cu Nanoalloys Anchored on Periclase-Phase MgAlO<i><sub>x</sub></i> Nanosheets for Enhanced Syngas Production

The Key Points of Highly Stable Catalysts for Methane Reforming with Carbon Dioxide

Promoting Methane Dry Reforming over Ni Catalysts Via Modulating Surface Electronic Structures of BN Supports by Doping Carbon

Stable Trimetallic NiFeCu Catalysts with High Carbon Resistance for Dry Reforming of Methane

Promotional Effect of Ni−Sn Interaction over Ni Supported on Sn‐incorporated MCM‐41 Catalysts for CO 2 Reforming of CH 4

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Tuning Metal–Support Interactions on Ni/Al2O3 Catalysts to Improve Catalytic Activity and Stability for Dry Reforming of Methane

Improving Anti-Coking Properties of Ni/Al2O3 Catalysts via Synergistic Effect of Metallic Nickel and Nickel Phosphides in Dry Methane Reforming

Interface-directed epitaxially growing nickle ensembles as efficient catalysts in dry reforming of methane

Reducing Carbon Deposition and Enhancing Reaction Stability by Ceria for Methane Dry Reforming over Ni@SiO2@CeO2 Catalyst