Abstract:A series of ultra-clean, unsupported Cu-doped and Pd-doped Ni model catalysts was investigated to develop the fundamental concept of metal doping impact on the carbon tolerance and catalytic activity in the dry reforming of methane (DRM). Wet etching with concentrated HNO3 and a subsequent single sputter–anneal cycle resulted in the full removal of an already existing oxidic passivation layer and segregated and/or ambient-deposited surface and bulk impurities to yield ultra-clean Ni substrates. Carbon solubility, support effects, segregation processes, cyclic operation temperatures, and electronic and ensemble effects were all found to play a crucial role in the catalytic activity and stability of these systems, as verified by X-ray photoelectron spectroscopy (XPS) surface and bulk characterization. Minor Cu promotion showed the almost complete suppression of coking with a moderate reduction in catalytic activity, while high Cu loadings facilitated carbon growth alongside severe catalytic deactivation. The improved carbon resistance stems from an increased CH4 dissociation barrier, decreased carbon solubility in the bulk, good prevailing CO2 activation properties and enhanced CO desorption. Cyclic DRM operation on surfaces with Cu content that is too high leads to impaired carbon oxidation kinetics by CO2 and causes irreversible carbon deposition. Thus, an optimal and stable NiCu composition was found in the region of 70–90 atomic % Ni, which allows an appropriate high syngas production rate to be retained alongside a total coking suppression during DRM. In contrast, the more Cu-rich NiCu systems showed a limited stability under reaction conditions, leading to undesired surface and bulk segregation processes of Cu. The much higher carbon deposition rate and solubility of unsupported NiPd and Pd model catalysts results in severe carbon deposition and catalytic deactivation. To achieve enhanced carbon conversion and de-coking, an active metal oxide boundary is required, allowing for the increased clean-off of re-segregated carbon via the inverse Boudouard reaction. The carbon bulk diffusion on the investigated systems depends strongly on the composition and decreases in the following order: Pd > NiPd > Ni > NiCu > Cu.

Stable Trimetallic NiFeCu Catalysts with High Carbon Resistance for Dry Reforming of Methane

Co–Ni Alloy Supported on CeO2 As a Bimetallic Catalyst for Dry Reforming of Methane

Highly dispersed Fe-decorated Ni nanoparticles prepared by atomic layer deposition for dry reforming of methane

Dry Reforming of Methane on NiCu and NiPd Model Systems: Optimization of Carbon Chemistry

Highly Stable Ni−B/Honeycomb−Structural Al2O3 Catalysts for Dry Reforming of Methane

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Atypical Stability of Exsolved Ni-Fe Alloy Nanoparticles on Double Layered Perovskite for Co2 Dry Reforming of Methane

Improving Anti-Coking Properties of Ni/Al2O3 Catalysts via Synergistic Effect of Metallic Nickel and Nickel Phosphides in Dry Methane Reforming

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Ni3X-type alloy catalysts for dry reforming of methane with high catalytic activity and stability: A density functional theory study

Ni-Cu Alloy Nanoparticles Confined by Physical Encapsulation with SiO 2 and Chemical Metal-Support Interaction with CeO 2 for Methane Dry Reforming

Preparation of Nanoscale Ni–Cu Supported Over Hydrochar by Hydrothermal Method and Effect of Ni/Cu Ratio on Catalytic Performances in Dry Reforming of Methane

Bimetallic Nickel-Cobalt catalysts and their application in dry reforming reaction of methane

Lattice Strained Ni-Co alloy as a High-Performance Catalyst for Catalytic Dry Reforming of Methane

Development of a Highly Stable Ternary Alloy Catalyst for Dry Reforming of Methane

Controllable Preparation of Nano-Ni to Eliminate Step Edges of Carbon Deposition on Ni-Based Catalysts for Methane Dry Reforming

Screening Transition Metals (mn, Fe, Co, and Cu) Promoted Ni-Based CO2 Methanation Bimetal Catalysts with Advanced Low-Temperature Activities

The Key Points of Highly Stable Catalysts for Methane Reforming with Carbon Dioxide

Improving Catalytic Stability and Coke Resistance of Ni/Al2O3 Catalysts with Ce Promoter for Relatively Low Temperature Dry Reforming of Methane Reaction

Enhancing the dry reforming of methane over Ni-Co-Y/WC-AC catalyst: Influence of the different Ni/Co ratio on the catalytic performance