Abstract:Ni-based catalysts are one of the most promising Dry Reforming reaction (DRM) catalysts due to their cheapness and high catalytic activity, but the deactivation caused by severe carbon deposition is a common problem in Ni-based catalysts, and one solution is to dope with other elements. In this paper, density functional theory (DFT) combined with microkinetic simulation was used to study the effect of the surface doping concentration of Mo on the catalytic activity and carbon deposition resistance of Ni catalyst. In the surface doping model, the Mo surface doping concentration is set to 0, 1/9, 2/9, 3/9, 4/9 ML, namely Ni(111), NiMo1(111), NiMo2(111), NiMo3(111) and NiMo4(111). The electronic structure analysis shows that the doping of Mo improves the electron donating ability of the Ni catalyst and therefore generally increases the adsorption energy of the intermediate species in the DRM reaction. Compared with Ni(111), on NiMox(111)(x = 1–3), the activation energy of CH4 dissociation, the activation energy of CO2 dissociation, and the activation energy of C-O bond formation are generally reduced, while the activation energy of CH* dissociation and CHxO(x = 1–2) dehydrogenation increases. It was shown that the CH-O oxidation route is favorable for DRM and the Mo doped Ni catalyst showed lower free energy span. These DFT results clearly show the doping Mo not only improve the DRM catalytic activity but also enhance the carbon resistance ability . In the microkinetic model, the reaction sites on the catalyst surface were distinguished into sites affected by Mo (#) and sites not affected by Mo (*), and the influence of O coverage was considered on the activation energy of CO2 dissociation at the reaction sites affected by Mo. At 1073.15 K, the order of the catalytic activity of these catalysts for DRM reaction is NiMo2(111) > NiMo3(111) > NiMo1(111) > Ni(111), and NiMo2(111) shows the best catalytic activity for DRM. The microkinetic simulation results showed that without considering that adsorbed O may lead to the formation of NiMoO4 and thus affect the catalytic activity, the Mo-doped Ni catalyst, especially NiMo2(111), exhibits much higher catalytic activity than Ni(111) under high temperature conditions, and Ni(111) is mainly occupied by C* whereas NiMox(111)(x = 1–3) is basically not affected by C species when the simulation reaches a steady state. The strong electron donating ability of Mo is considered to be the basis for increasing the catalytic performance of Ni-based catalysts, which means that our conclusion can be more widely promoted, i.e. the catalytic activity and carbon deposition resistance of Ni-based catalysts can be improved by doping trace metals with strong electron donating ability .

Dry Reforming of Methane on NiCu and NiPd Model Systems: Optimization of Carbon Chemistry

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Controllable Preparation of Nano-Ni to Eliminate Step Edges of Carbon Deposition on Ni-Based Catalysts for Methane Dry Reforming

Bimetallic Nickel-Cobalt catalysts and their application in dry reforming reaction of methane

Development of Active and Stable Low Nickel Content Catalysts for Dry Reforming of Methane

Promoted coke resistance of Ni by surface carbon for the dry reforming of methane

Recent advances in promoting dry reforming of methane of Nickel-based catalysts

Stable Trimetallic NiFeCu Catalysts with High Carbon Resistance for Dry Reforming of Methane

Dry reforming of methane on Ni(1 1 1) surface with different Mo doping ratio: DFT-assisted microkinetic study

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Dry reforming of methane on doped Ni nanoparticles: Feature-assisted optimizations and ranking of doping metals for direct activations of CH4 and CO2

Dry reforming of methane for syngas production over noble metals modified M-Ni@S-1 catalysts (M = Pt, Pd, Ru, Au)

Methane dry reforming over nickel-based catalysts: insight into the support effect and reaction kinetics

Spray‐dried Ni‐Co bimetallic catalysts for dry reforming of methane

Promoting Methane Dry Reforming over Ni Catalysts Via Modulating Surface Electronic Structures of BN Supports by Doping Carbon

Preparation of Nanoscale Ni–Cu Supported Over Hydrochar by Hydrothermal Method and Effect of Ni/Cu Ratio on Catalytic Performances in Dry Reforming of Methane

Catalysts in Coronas: A Surface Spatial Confinement Strategy for High-Performance Catalysts in Methane Dry Reforming

Optimization of Ni-Based Catalysts for Dry Reforming of Methane via Alloy Design: A Review

The effect of interfacial engineering on the deactivation resistance of nickel-based catalysts for dry reforming of methane