Abstract:A series of ultra-clean, unsupported Cu-doped and Pd-doped Ni model catalysts was investigated to develop the fundamental concept of metal doping impact on the carbon tolerance and catalytic activity in the dry reforming of methane (DRM). Wet etching with concentrated HNO3 and a subsequent single sputter–anneal cycle resulted in the full removal of an already existing oxidic passivation layer and segregated and/or ambient-deposited surface and bulk impurities to yield ultra-clean Ni substrates. Carbon solubility, support effects, segregation processes, cyclic operation temperatures, and electronic and ensemble effects were all found to play a crucial role in the catalytic activity and stability of these systems, as verified by X-ray photoelectron spectroscopy (XPS) surface and bulk characterization. Minor Cu promotion showed the almost complete suppression of coking with a moderate reduction in catalytic activity, while high Cu loadings facilitated carbon growth alongside severe catalytic deactivation. The improved carbon resistance stems from an increased CH4 dissociation barrier, decreased carbon solubility in the bulk, good prevailing CO2 activation properties and enhanced CO desorption. Cyclic DRM operation on surfaces with Cu content that is too high leads to impaired carbon oxidation kinetics by CO2 and causes irreversible carbon deposition. Thus, an optimal and stable NiCu composition was found in the region of 70–90 atomic % Ni, which allows an appropriate high syngas production rate to be retained alongside a total coking suppression during DRM. In contrast, the more Cu-rich NiCu systems showed a limited stability under reaction conditions, leading to undesired surface and bulk segregation processes of Cu. The much higher carbon deposition rate and solubility of unsupported NiPd and Pd model catalysts results in severe carbon deposition and catalytic deactivation. To achieve enhanced carbon conversion and de-coking, an active metal oxide boundary is required, allowing for the increased clean-off of re-segregated carbon via the inverse Boudouard reaction. The carbon bulk diffusion on the investigated systems depends strongly on the composition and decreases in the following order: Pd > NiPd > Ni > NiCu > Cu.

Promoting Methane Dry Reforming over Ni Catalysts Via Modulating Surface Electronic Structures of BN Supports by Doping Carbon

Recent advances in promoting dry reforming of methane using nickel-based catalysts

Promoted coke resistance of Ni by surface carbon for the dry reforming of methane

Recent advances in promoting dry reforming of methane of Nickel-based catalysts

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Design of Active and Stable Bimodal Nickel Catalysts for Methane Reforming with CO2

Engineering Bimetallic Ni-Cu Nanoparticles Confined in MOF-Derived Nanocomposite for Efficient Dry Reforming of Methane

Highly Stable Ni−B/Honeycomb−Structural Al2O3 Catalysts for Dry Reforming of Methane

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Effect of Interstitial Carbon Atoms in Core-Shell Ni3ZnC0.7/Al2O3 Catalyst for High-Performance Dry Reforming of Methane

Surface Borate-Derived Highly Dispersed and Stable Metal Nanoparticles on Nitrogen-Vacancy Boron Nitride Support Promoting CO Methanation

Mechanistic and Microkinetic Insights into the Stability and Activity of Ni3In Catalyst for Dry Methane Reforming

Mechanistic and microkinetic insights into the stability and activity of Ni 3 In catalyst for dry methane reforming

Reveal and Correlate Working Geometry and Surface Chemistry of Ni Nanocatalysts in CO2 Reforming of Methane

Bimetallic Nickel-Cobalt catalysts and their application in dry reforming reaction of methane

Controllable Preparation of Nano-Ni to Eliminate Step Edges of Carbon Deposition on Ni-Based Catalysts for Methane Dry Reforming

Promotional Effect of Ni−Sn Interaction over Ni Supported on Sn‐incorporated MCM‐41 Catalysts for CO 2 Reforming of CH 4

Anti-coking NiCe /HAP Catalyst with Well-Balanced Carbon Formation and Gasification in Methane Dry Reforming

Dry Reforming of Methane on NiCu and NiPd Model Systems: Optimization of Carbon Chemistry

Reforming of Methane over Ni-based Catalyst : Development of Ni-Zr Materials

Dry reforming of methane on doped Ni nanoparticles: Feature-assisted optimizations and ranking of doping metals for direct activations of CH4 and CO2