Abstract:Dry reforming of methane (DRM) has been investigated in numerous studies as an attractive process to produce synthesis gas. Although nonprecious-metal catalysts are widely employed in this reaction, their large scale application has been hampered due to difficulties in controlling the metal sintering and coking. The main objective of this research was to improve DRM reaction through highly active and effective nickel catalysts with bimodal structure. In this work, the effect of pore structures (nonporous, monomodal and bimodal structures) on the catalytic performance, stability and coke formation were comparatively discussed. Two series of nickel catalysts were developed by one-step and impregnation methods. By using one-step strategy, three kinds of bases (NH3 center dot H2O, Urea and NaOH) were used to prepare monomodal (Ni-SiO2-NH3 center dot H2O), bimodal (Ni-SiO2-Urea) and non-porous (Ni-SiO2-NaOH) catalysts. By using impregnation method, monomodal (Ni/M-SiO2) and bimodal (Ni/B-SiO2) catalysts were prepared. The pore structure exerted crucial effect on the catalytic performance in DRM. In comparison to monomodal catalyst, in each series bimodal nickel catalyst exhibited higher activity and more stable performance in DRM. The non-porous Ni-SiO2-NaOH exhibited inferior activity to the monomodal or bimodal catalyst due to the significant decrease in surface area. The obtained catalysts prepared by one step method contained Ni nanoparticles with diameter of 3 nm, about 1/8 of the catalysts prepared by impregnation method. Ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS) confirmed the well-dispersed Ni particles were incorporated into the silica framework. Temperature programmed reduction and X-ray photoelectron spectroscopy (XPS) also verified the strengthened interaction between Ni species and silica support. Thus, these structural properties led to higher activity over Ni-SiO2-Urea than the corresponding catalyst with equivalent pore structure. Relative to the initial methane conversion of 74% over Ni/B-SiO2, Ni-SiO2-Urea catalyst showed both stable CH4 and CO2 conversions and a constant H-2/CO ratio close to 1, without significant decay of the activity during 24 h on stream.

Emergent Ni catalysts induced by nitride-to-oxide transformation for coking and sintering resistant dry reforming of methane

Recent advances in promoting dry reforming of methane of Nickel-based catalysts

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane

Recent advances in promoting dry reforming of methane using nickel-based catalysts

Improving the Anti-Coking Ability in the Ni-M(M = Ce, Zr, Co)@SiO2 Yolk-Shell Catalysts for Dry Reforming of Methane

Highly Dispersed Ni Nanoparticles Confined in Mesoporous SBA-15 for Methane Dry Reforming with Improved Coke Resistance and Stability

A strategy of constructing the Ni@silicalite-1 catalyst structure with high activity and resistance to sintering and carbon deposition for dry reforming of methane

The effect of interfacial engineering on the deactivation resistance of nickel-based catalysts for dry reforming of methane

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Hollow Hierarchical Ni/MgO-SiO2 Catalyst with High Activity, Thermal Stability and Coking Resistance for Catalytic Dry Reforming of Methane

Enhanced Methane Dry Reforming with Ni/SiO2 Catalysts Featuring Hierarchical External Nanostructures

Dry reforming of methane for syngas production over attapulgite-derived MFI zeolite encapsulated bimetallic Ni-Co catalysts

Highly Efficient Ni@SiO2 Core-Shell Catalysts for Dry Reforming of Methane Prepared by One-Pot Microemulsion Nucleation and Coating Method

Unbounding the Future: Designing NiAl‐based Catalysts for Dry Reforming of Methane

Engineering the Interface and Interaction Structure on Highly Coke-Resistant Ni/CeO<sub>2</sub>-Al<sub>2</sub>O<sub>3</sub> Catalyst for Dry Reforming of Methane

Design of Active and Stable Bimodal Nickel Catalysts for Methane Reforming with CO2

Highly dispersed Ni/MgO-mSiO2 catalysts with excellent activity and stability for dry reforming of methane

MOF-derived Carbon-Based Catalysts with Enhanced Anti-Coking Property for the Dry Reforming of Methane

Improved performance of Ni/Al2O3 catalyst deriving from the hydrotalcite precursor synthesized on Al2O3 support for dry reforming of methane

Investigation into the coking-related key reaction steps in dry reforming of methane over NiMgO x catalyst

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane