Abstract:Dry reforming of methane (DRM) is an efficient way for CO2 utilization to convert CH4 and CO2 to syngas (H2 and CO) that is ingredient to produce hydrogen, methanol and Fischer-Tropsch. Great attention is drawn to Ni-based catalyst due to its remarkable reactivity for CH4 and CO2 conversion. However, the weakness of sintering and coking restrains its industrial applications. The successful design of cost-effective, efficient and stable Ni-based catalysts would be a grand breakthrough for the technology. Herein, the thermodynamics analysis and the mechanisms of sintering and coking are presented. Then, the strategies of the catalysts are elaborated as follows: 1) supports improving the particle dispersion of nickels and changing the reaction process for the hindrance of coking. 2) promoters regulating the nickel chemical properties to enable catalytic DRM performance. 3) catalysts by varied preparation methods possessing different size and interaction. Finally, the challenges and future perspectives are highlighted.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is that during the dry reforming of methane (DRM), nickel - based catalysts are prone to sintering and carbon deposition at high temperatures. These problems limit the wide use of nickel - based catalysts in industrial applications because they will lead to a decrease in catalyst activity and stability. Specifically, the paper focuses on the following aspects: 1. **Thermodynamic analysis**: Through thermodynamic analysis, the Gibbs free energy change of the DRM reaction and the kinetic behaviors of the main reaction and side reactions are explored to understand the selectivity and conversion rate of the reaction at different temperatures. 2. **Sintering mechanism**: The sintering mechanism of nickel - based catalysts at high temperatures is discussed in detail, including particle migration and coalescence (PMC) and Ostwald ripening (OR), and methods for suppressing sintering are proposed. 3. **Carbon deposition mechanism**: The formation process of carbon deposition and its impact on the performance of the catalyst are analyzed, especially the formation and transformation of different types of carbon species (such as adsorbed atomic carbon, fibrous carbon and graphite carbon). 4. **Catalyst modification strategies**: - **Carrier selection**: Select appropriate carrier materials (such as alumina, silica, titanate nanotubes, etc.) to improve the dispersion of nickel particles and the anti - sintering ability. - **Additive addition**: By adding different additives (such as sodium, lanthanum, magnesium, etc.), the chemical properties of nickel are adjusted to enhance the anti - carbon - deposition ability and catalytic performance of the catalyst. - **Preparation method**: Different preparation methods (such as sol - gel method, hydrothermal method, coprecipitation method, etc.) are used to prepare catalysts with different structures and interactions to improve their stability and activity. 5. **Future prospects**: The challenges and future research directions of nickel - based catalysts in DRM are discussed, emphasizing the importance of developing low - cost, efficient and stable catalysts for the realization of the industrial application of DRM. In general, this paper aims to propose effective strategies to improve the performance of nickel - based catalysts in the DRM process through systematic research, thereby promoting the industrial application of this technology.

Recent advances in promoting dry reforming of methane of Nickel-based catalysts

Recent advances in promoting dry reforming of methane using nickel-based catalysts

Recent advances in dry reforming of methane over Ni-based catalysts

Bimetallic Nickel-Cobalt catalysts and their application in dry reforming reaction of methane

Recent Advances in Coke Management for Dry Reforming of Methane over Ni-Based Catalysts

Unbounding the Future: Designing NiAl‐based Catalysts for Dry Reforming of Methane

Recent Advances in Ni-Based Catalysts for CH4-CO2 Reforming (2013–2023)

CO2 reforming of CH4 to syngas over nickel-based catalysts

Optimization of Ni-Based Catalysts for Dry Reforming of Methane via Alloy Design: A Review

Research Progress of Ni-based Composite Catalysts for Methane Dry Reforming

Smart Designs of Anti-Coking and Anti-Sintering Ni-Based Catalysts for Dry Reforming of Methane: A Recent Review

Low-temperature catalytic CO2 dry reforming of methane on Ni-based catalysts: A review

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

The effect of interfacial engineering on the deactivation resistance of nickel-based catalysts for dry reforming of methane

Design of Active and Stable Bimodal Nickel Catalysts for Methane Reforming with CO2

Emergent Ni catalysts induced by nitride-to-oxide transformation for coking and sintering resistant dry reforming of methane

Anti-Coking and Anti-Sintering Ni/Al2O3 Catalysts in the Dry Reforming of Methane: Recent Progress and Prospects

Dry reforming of methane on doped Ni nanoparticles: Feature-assisted optimizations and ranking of doping metals for direct activations of CH4 and CO2

Dry reforming of methane for syngas production over attapulgite-derived MFI zeolite encapsulated bimetallic Ni-Co catalysts

Dry reforming of methane over silica zeolite-encapsulated Ni-based catalysts: Effect of preparation method, support structure and Ni content on catalytic performance

Engineering Bimetallic Ni-Cu Nanoparticles Confined in MOF-Derived Nanocomposite for Efficient Dry Reforming of Methane