Abstract:The main objective of this work is to present a new particle unresolved 3D-1D DEM-CFD-based model enabling predictions of a new steam methane reforming (SMR) driven by the direct electrical current. The main feature of this technology is the use of metal particles heated by the Joule heat resulting from direct electrical current flowing through metal particles in order to heat the gas phase and catalyst particles (Ni/ α -Al2O) to sustain endothermic chemical reactions. The model uses six gaseous chemical species (CH4, CO2, CO, H2O, H2, N 2 ) in the gas phase inside the catalyst. The Langmuir–Hinshelwood-Hougen-Watson (LHHW) kinetics is used. The distinguishing feature and the novelty of the model presented in this work consist in the calculation of the 3D distribution of the electric field inside non mono-disperse fixed beds. The electric field distribution is used to calculate the Joule heating term for each electrically conducting particle participating in the electrical current flow. Additionally, the new model predictions are compared with alternative models based on the chemical equilibrium principles. The models have been numerically solved using MATLAB. To illustrate the performance of the models and to check the feasibility of a new electrical steam methane reforming concept, we consider a cylindrical electrically insulated tube with a diameter of 0.1 m and a height of 0.5 m, which is filled with metal particles and catalyst particles with diameters of 5 mm and 2 mm, respectively. Parametric runs for different flow rates from 0.0025 kg/s to 0.01 kg/s and electrical power from 6.9 kW to 39 kW have been carried out. Results of simulations showed that an increase in the flow rate value ( m ̇ ) by keeping constant input electrical power leads to a decrease in the conversion of CH 4 proportionally to m ̇ - 1 / 2 . A linear increase in the flow rate and input power leads to a decrease in methane conversion. When the input electrical power is increased, the difference between catalyst particle temperature and gas temperature decreases.

Scale-up studies on electrically driven steam methane reforming

Steam methane reforming driven by the Joule heating

DEM-based model for steam methane reforming

Electrified Methane Reforming: Understanding the Dynamic Interplay

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

Improving performance of induction-heated steam methane reforming

Experimental Study on Reactor Scale-Up for Microwave-Assisted Pyrolysis of Methyl Ricinoleate

Dynamic Electrification of Dry Reforming of Methane with In Situ Catalyst Regeneration

Investigation of methanol steam reforming reformer heated by catalyst combustion for kW-scale fuel cell

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Process Analysis of Steam Reforming of Methane under Milliseconds Contact Time in Micro-reactors

Heat Transfer and Reaction Characteristics of Steam Methane Reforming in a Novel Composite Packed Bed Microreactor for Distributed Hydrogen Production

Preparation of an Anodic Alumina-Supported Ni Catalyst and Development of a Catalytic Plate Reformer for the Steam Reforming of Methane

A comparative study of Rh and Ni coated microchannel reactor for steam methane reforming using CFD with detailed chemistry

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

The Intrinsic Kinetics of Methane Steam Reforming over a Nickel-Based Catalyst in a Micro Fluidized Bed Reaction System

Verification of a 0D model for the heat and mass transfer inside a moving spherical catalyst for steam methane reforming

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Scaling Up the Advanced Dry Reforming of Methane (DRM) Reactor System for Multi-Walled Carbon Nanotubes and Syngas Production: An Experimental and Modeling Study