Abstract:The development of efficient and compact reactors is an urgent need in the field of distributed hydrogen production. Steam reforming of methane is the main method to produce hydrogen. Aiming at the problems of high heat and mass transfer resistance of the existing fixed bed reactors, and the difficulty of replacing the wall-coated catalyst in the microreactors, a composite packed bed was proposed to meet the demand of small-scale hydrogen production. The structure consists of a multi-channel framework with high thermal conductivity, which is filled with Ni/Al2O3 catalyst particles in each channel. A three-dimensional numerical model of the steam methane reforming process in the novel reactor was established using ANSYS FLUENT software. The heat transfer and reaction characteristics in the reactor were studied. Firstly, the advantages of the multi-channel skeleton in enhancing the radial heat transfer performance were verified by comparing it with the traditional randomly packed bed without the channel skeleton. Secondly, the influences of inlet velocity, inlet temperature, and heating wall temperature on the heat transfer and reaction performances in the reactor were studied, and a sensitivity factor was adopted to do the sensitivity analysis. The results show that the methane conversion rate is most sensitive to the wall temperature, while the inlet velocity and inlet temperature have less effect. Finally, the effects of two skeleton materials were studied. The results show that when the wall temperature is higher than 1200 K, there is no significant difference between these two reactors, which indicates that the use of cordierite with a lower price, but also with a lower thermal conductivity can significantly reduce the reactor's cost. The conclusions can be used as a reference for the design of small-scale hydrogen production reactors.

Process Analysis of Steam Reforming of Methane under Milliseconds Contact Time in Micro-reactors

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Milliseconds Steam Reforming of Methane Using Rh/MgO/γ-Al2O3 Catalyst

A comparative study of Rh and Ni coated microchannel reactor for steam methane reforming using CFD with detailed chemistry

Steam reforming of methane over Ni catalyst in micro-channel reactor

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

The Intrinsic Kinetics of Methane Steam Reforming over a Nickel-Based Catalyst in a Micro Fluidized Bed Reaction System

Numerical Analysis on Steam Methane Reforming in a Plate Microchannel Reactor: Effect of Washcoat Properties

Catalytic Performance of Ni Catalyst for Steam Methane Reforming in a Micro-Channel Reactor at High Pressure

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Steam reforming of methane: Current states of catalyst design and process upgrading

Measurement of Reaction Temperature Distribution Inside of Methanol Steam Reforming Microreactor Using Infrared Thermography

Improved Catalytic Performance of Ni Catalysts for Steam Methane Reforming in a Micro-Channel Reactor

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Heat Transfer and Reaction Characteristics of Steam Methane Reforming in a Novel Composite Packed Bed Microreactor for Distributed Hydrogen Production

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Syngas production from steam and dry reforming of methane over ni-based catalyst in microchannel reactor : cfd modeling with elementary kinetics