Abstract:In the chemical industry, hydrogen (H2) production through steam-methane reforming is a well-established process. With the growing demand for H-fueled vehicles and charging stations, there is a need for compact reformers with efficient heat transfer capabilities. In this study, computational fluid dynamics simulations were performed to evaluate the methane (CH4) conversion and heat transfer efficiency of various reformer designs. These designs include single, double, and triple tubes, each with parallel- and counter-flow configurations between the reformate feed and heat source. The findings revealed substantial disparities in methane conversion between the tube designs and flow configurations. Notably, the triple-tube design outperforms single and double tubes, exhibiting higher methane conversion and improved heat transfer efficiency. This superior performance is attributed to the larger wall area facing the heat source and additional heat recovery from the reformate flowing in the inner annulus. This led to the highest temperature at the catalyst exit among the cases, increasing methane conversion, and the lowest reformate temperature at the reformer tube exit, which is also beneficial for the subsequent water–gas shift reaction process. Installing external fins on the reformer tube provided a more effective enhancement of heat transfer than using internal fins in the catalyst section. Regardless of the tube design employed, the counter-flow configuration consistently enhanced the heat transfer efficiency, resulting in 4.6–11.9% higher methane conversion than the parallel-flow configuration. Consequently, the triple-tube design with the counter-flow configuration achieved the highest methane conversion, offering flexibility in the reformer design, including the potential for lower heat input and a reduced catalyst volume.

Heat Sink and Conversion of Catalytic Steam Reforming for Hydrocarbon Fuel

Cooling and coke deposition of hydrocarbon fuel with catalytic steam reforming

The ReSER-COG Process for Hydrogen Production on a Ni–CaO/Al2O3 Complex Catalyst

Experimental study of hydrogen catalytic combustion wall temperature distribution characteristics and its effect on the coupling performance of autothermal reformers

Experimental Study on the Ethanol-Assisted Catalytic Steam Reforming of Endothermic Hydrocarbon Fuel.

Endothermic Reaction of High Heat Sink Hydrocarbon Jet Fuel

Coke Deposition Inhibition for Endothermic Hydrocarbon Fuels in a Reforming Catalyst-Coated Reactor

Interaction Between Thermal Cracking and Steam Reforming Reactions of Aviation Kerosene

Heat Transfer and Thermal Cracking Behavior of Hydrocarbon Fuel

Coke Suppression of Kerosene by Wall Catalytic Steam Reforming

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

The heat transfer mechanism coupling pyrolysis and flow of hydrocarbon fuel in heated tube under supercritical pressure

Thermal matching characteristics in an autothermal methanol reforming microchannel reactor for hydrogen production

Temperature-dependent Matching of Heat Transfer and Catalysis in Cryogenic Heat Exchangers with Ortho-Para Hydrogen Continuous Conversion

Modeling and Numerical Investigations of Flowing N-Decane Partial Catalytic Steam Reforming at Supercritical Pressure

Investigation of methanol steam reforming reformer heated by catalyst combustion for kW-scale fuel cell

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

Numerical Study on Comprehensive Performance of Flow and Heat Transfer Coupled with Ortho-Para Hydrogen Conversion

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Numerical Simulation of Enhanced Heat Transfer in Tubes Using Methane Steam Reforming

Liquid Ammonia as a Potential High Heat Sink Fuel via Catalytic Decomposition over Ru/CeO 2 –Al 2 O 3 Coatings