Abstract:Based on thermodynamic calculation and experimental research, the reaction characteristics of reactive sorption enhanced steam reforming of modeled biogas for hydrogen production (ReSER-Biogas)have been studied in this paper.First,the hydrogen production model was established where the methane steam reforming reaction was coupled with the calcium oxide and carbon dioxide reaction. The influence of some reaction conditions such as CO2removal ratio(ζ), reaction temperature (T),the molar ratio of steam to methane (β)on the methane conversion and hydrogen purity was investigated according to the simulation results with volume ratio of carbon dioxide to methane in feed (α) 0.25,0.47 and 0.63,respectively.The calculation results showed that both the methane conversion and H2purity could be increased effectively by the raise of ζ,T and β. When ζ=0.95,T=600℃,β=4,the methane conversion could reach 94% and H2concentration could reach 96%.Experimental evaluation of ReSER-Biogas was studied by using the mixture of Ni catalyst and nano-CaO based CO2adsorbent in a fixed bed reactor with modeled biogas.Based on the variation of T,β and α,the methane conversion and H2concentration under different reaction conditions were obtained.The reliability of the simulation results and the laws of the reaction conditions influence were verified to be true.The experimental results indicated that the hydrogen content reached up to 93% with CO of 0.32% under the conditions of P=0.1 MPa,ζ=0.95,T=600℃,β=4 and α=0.43 which proved that the ReSER-Biogas could produce high-purity hydrogen with little CO in one reactor at lower temperature comparing with the conventional non adsorption enhanced biogas-steam reforming process.It is of great practical significance for the development of high-efficienty and energy-saving technologies for hydrogen production by biogas.

The ReSER-COG Process for Hydrogen Production on a Ni–CaO/Al2O3 Complex Catalyst

Kinetic Study of Reactive Sorption-Enhanced Reforming of Coke Oven Gas for Hydrogen Production

Thermodynamic calculations for reactive sorption enhanced reforming of C2/C3 light hydrocarbons

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

A sorption catalyst complex with nano CaCO3 precursor for hydrogen production used in reser process

Stability of the Ni–TiO2@nano CaO/Al2O3 Complex Catalyst Used in ReSER Process for Hydrogen Production

Improvement of the stability of a ZrO2-modified Ni–nano-CaO sorption complex catalyst for ReSER hydrogen production

Preparation of a Mesoporous Sorption Complex Catalyst and Its Evaluation in Reactive Sorption Enhanced Reforming

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

The calculation and experimental study of reactive sorption enhanced steam reforming of modeled biogas for hydrogen production

The Characteristics of A Sorption-Enhanced Steam-Methane Reaction for the Production of Hydrogen Using Co2 Sorbent

A study on the stability of a NiO-CaO/Al2O3 complex catalyst by La2O3 modification for hydrogen production

The Evaluation of Reactive Sorption Enhanced Biogas Steam Reforming Process for Hydrogen Production Using Nano-Sized CaO Adsorbents.

The Microstructure and Stability of a Ni-nano-CaO/Al2O3 Reforming Catalyst under Carbonation–calcination Cycling Conditions

Sorption-Enhanced Steam Reforming of Glycerol for Hydrogen Production over a NiO/NiAl2O4 Catalyst and Li2ZrO3-Based Sorbent

The Characteristics of Sorption Enhanced Steam Methane Reforming for Hydrogen Production on a Complex Catalyst

Stability of Complex Catalyst with NiO@TiO2 Core-Shell Structure for Hydrogen Production

Calcium Cobaltate: a Phase-change Catalyst for Stable Hydrogen Production from Bio-glycerol

Hydrogen production by CO2 reforming of CH4 in coke oven gas over Ni–Co/MgAl2O4 catalysts

Production of Syngas Via Partial Oxidation and CO2Reforming of Coke Oven Gas over a Ni Catalyst

Sorption-enhanced reforming of raw COG and its adaptability to hydrogen metallurgy: Thermodynamic analysis