Abstract:Sorption-enhanced steam methane reforming (SESMR) that combines steam reforming of methane with in situ CO2 removal is a promising technology for H-2 production, and bifunctional catalysts that integrate catalytic and absorptive sites into one body are believed to have reduced mass transfer resistances. However, it is still a challenge to prepare bifunctional catalysts with high stability. Here, we used a sol-gel technique based on the formation of citrate complexes to prepare a series of Ni/CaO-CaZrO3 bifunctional catalysts in which Ni, CaO and CaZrO3 acted as catalyst, sorbent and stabilizer, respectively. The stabilizer, Ni loading and CaO content had a direct effect on the structure and morphology of the catalyst, which in turn influenced its CO2 uptake and SESMR performance. Compared to Ni/CaO, the CaZrO3-stabilized Ni/CaO-CaZrO3 had smaller and fluffier grains, showing not only higher CO2 uptake and better stability in 50 carbonation-calcination cycles, but also higher stability during cyclic SESMR process. In particular, the catalyst with a Ni loading of 15wt%, CaO content of around 60wt% and CaZrO3 content of 25wt% presented the best SESMR performance by taking into account the catalytic activity and stability as well as the duration of the prebreakthrough period. However, the best catalyst was still subject to slow deactivation during a long-term stability test (up to 90 SESMR cycles), which was mostly due to the smooth and compact shell formed on the catalyst surface. The partially deactivated catalyst can be effectively reactivated by an additional carbonation step during the cyclic SESMR operation. (C) 2016 Elsevier B.V. All rights reserved.

A sorption catalyst complex with nano CaCO3 precursor for hydrogen production used in reser process

Stability of the Ni–TiO2@nano CaO/Al2O3 Complex Catalyst Used in ReSER Process for Hydrogen Production

Study on the kinetics of Ca-based CO2 sorbent of carbonation and calcination for adsorption enhanced reforming process

Improvement of the stability of a ZrO2-modified Ni–nano-CaO sorption complex catalyst for ReSER hydrogen production

A study on the stability of a NiO-CaO/Al2O3 complex catalyst by La2O3 modification for hydrogen production

The ReSER-COG Process for Hydrogen Production on a Ni–CaO/Al2O3 Complex Catalyst

Preparation of a Mesoporous Sorption Complex Catalyst and Its Evaluation in Reactive Sorption Enhanced Reforming

The Microstructure and Stability of a Ni-nano-CaO/Al2O3 Reforming Catalyst under Carbonation–calcination Cycling Conditions

The Evaluation of Reactive Sorption Enhanced Biogas Steam Reforming Process for Hydrogen Production Using Nano-Sized CaO Adsorbents.

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

Kinetic Study of Reactive Sorption-Enhanced Reforming of Coke Oven Gas for Hydrogen Production

Investigation on Synthesis Conditions of Ni-CaO/Al2O3 Sorption Complex Catalyst by Hydrothermal Precipitation Method

The Characteristics of A Sorption-Enhanced Steam-Methane Reaction for the Production of Hydrogen Using Co2 Sorbent

Sorption-Enhanced Steam Reforming of Glycerol for Hydrogen Production over a NiO/NiAl2O4 Catalyst and Li2ZrO3-Based Sorbent

Stability of Complex Catalyst with NiO@TiO2 Core-Shell Structure for Hydrogen Production

A Novel Hybrid Iron-Calcium Catalyst/absorbent for Enhanced Hydrogen Production Via Catalytic Tar Reforming with In-Situ CO2 Capture

Calcium Cobaltate: a Phase-change Catalyst for Stable Hydrogen Production from Bio-glycerol

Sorption-enhanced Steam Methane Reforming by in Situ CO 2 Capture on a CaO–Ca 9 Al 6 O 18 Sorbent

High-purity hydrogen production from biogas by sorption-enhanced steam reforming over Ni-MgO-CaO bifunctional catalyst with paper fiber as template

A review of CO2 sorbents for promoting hydrogen production in the sorption-enhanced steam reforming process

Sol-gel-derived, CaZrO3-stabilized Ni/CaO-CaZrO3 Bifunctional Catalyst for Sorption-Enhanced Steam Methane Reforming