Enhanced hydrogen production from biomass gasification by in-situ CO 2 capture with Ni/Ca-based catalysts
Cui Quan,Mingchen Wang,Ningbo Gao,Tianhua Yang,Xiaolei Fan,Norbert Miskolczi
DOI: https://doi.org/10.1016/j.biombioe.2024.107110
IF: 5.774
2024-02-21
Biomass and Bioenergy
Abstract:Biomass is the important renewable clean energy. Compared to conventional technologies, biomass gasification experiences the problems of low hydrogen purity, low yield and high tar by-products. Coupling CO 2 capture with biomass gasification for hydrogen production can promote the steam reforming and water-gas shift reaction to improve hydrogen production regarding both purity and yield. In addition, energy consumption of the reforming process can be reduced as well due to the heat release from CO 2 adsorption. The application of Ni-based catalysts and CaO-based adsorbents faces problems such as poor resistance to sintering and easy deactivation. Here, biomass gasification experiments were conducted in a two-stage fixed-bed using pine sawdust as biomass raw materials. A range of Ni–Ce/CaO catalysts with different Ni loadings were synthesized using a sol-gel method. Characterization of these catalysts was carried out using techniques such as N 2 adsorption-desorption, X-ray diffraction, and field-emission scanning electron microscopy. Subsequently, a comprehensive investigation was conducted to assess the CO 2 capture performance, catalytic activity and stability of the prepared catalyst. Results show that the Ni–Ce/CaO catalyst has the best performance at reaction temperature of 600 °C, Ni/Ce ratio of 2:1, and the steam flow rate of 5 mL/h. The optimum condition produced the lowest CO 2 yield and the highest H 2 yield, which are 2.31 mmol/g and 12.8 mmol/g, respectively. The stability test of the Ni–Ce/CaO catalyst was also conducted, showing fluctration in gas concentrations initially during the first 5 h, then stablized for the remaining stability test.
energy & fuels,biotechnology & applied microbiology,agricultural engineering