Abstract:The development of efficient and compact reactors is an urgent need in the field of distributed hydrogen production. Steam reforming of methane is the main method to produce hydrogen. Aiming at the problems of high heat and mass transfer resistance of the existing fixed bed reactors, and the difficulty of replacing the wall-coated catalyst in the microreactors, a composite packed bed was proposed to meet the demand of small-scale hydrogen production. The structure consists of a multi-channel framework with high thermal conductivity, which is filled with Ni/Al2O3 catalyst particles in each channel. A three-dimensional numerical model of the steam methane reforming process in the novel reactor was established using ANSYS FLUENT software. The heat transfer and reaction characteristics in the reactor were studied. Firstly, the advantages of the multi-channel skeleton in enhancing the radial heat transfer performance were verified by comparing it with the traditional randomly packed bed without the channel skeleton. Secondly, the influences of inlet velocity, inlet temperature, and heating wall temperature on the heat transfer and reaction performances in the reactor were studied, and a sensitivity factor was adopted to do the sensitivity analysis. The results show that the methane conversion rate is most sensitive to the wall temperature, while the inlet velocity and inlet temperature have less effect. Finally, the effects of two skeleton materials were studied. The results show that when the wall temperature is higher than 1200 K, there is no significant difference between these two reactors, which indicates that the use of cordierite with a lower price, but also with a lower thermal conductivity can significantly reduce the reactor's cost. The conclusions can be used as a reference for the design of small-scale hydrogen production reactors.

Thermal matching characteristics in an autothermal methanol reforming microchannel reactor for hydrogen production

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

Computational modelling of methanol autothermal reforming phenomena in microchannel reactors for hydrogen production

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

Performance Study on Methanol Steam Reforming Rib Micro-Reactor with Waste Heat Recovery

Thermally autonomous microchannel reactor to produce hydrogen in steam reforming of methanol

Experimental study of hydrogen catalytic combustion wall temperature distribution characteristics and its effect on the coupling performance of autothermal reformers

Measurement of Reaction Temperature Distribution Inside of Methanol Steam Reforming Microreactor Using Infrared Thermography

Heat and mass transfer characteristics in reforming micro-reactor with micro-pin-fin arrays

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

Numerical simulation on flow and reaction characteristics for catalytic region in helium-heated steam reformer coupled with HTR-10

Comprehensive study on catalytic coating tubular reactor with electromagnetic induction heating for hydrogen production through methanol steam reforming

Design and optimization of reforming hydrogen production reaction system for automobile fuel cell

Heat Transfer and Reaction Characteristics of Steam Methane Reforming in a Novel Composite Packed Bed Microreactor for Distributed Hydrogen Production

Sliding Mode Control of Hydrogen Production Via Autothermal Reforming of Methanol.

Structural design and performance research of methanol steam reforming microchannel for hydrogen production based on mixing effect