Abstract:Micro-electromechanical systems and nano-electromechanical systems have attracted a great deal of attention in recent years. The flow and heat transfer behaviors of micromachines for separation applications are usually different from that of macro counterparts. In this paper, heat and mass transfer characteristics of rarefied nitrogen gas flows in microchannels are investigated using direct simulation Monte Carlo with improved pressure boundary conditions. The influence of aspect ratio and wall temperature on mass flowrate and wall heat flux in microchannels are studied parametrically. In order to examine the aspect ratio effect on heat and mass transfer behaviors, the wall temperature is set constant at 350 K and the aspect ratio of the microchannel varies from 5 to 20. The results show that as the aspect ratio increases, the velocity of the flow decreases, so does the mass flowrate. In a small aspect ratio channel, the heat transfer occurs throughout the microchannel; as the aspect ratio of the microchannel increases, the region of thermal equilibrium extends. To investigate the effects of wall temperature (Tw) on the mass flowrate and wall heat flux in a microchannel, the temperature of the incoming gas flow (Tin) is set constant at 300 K and the wall temperature varies from 200 K to 800 K while the aspect ratio is remained unchanged. Results show that majority of the wall heat flux stays within the channel entrance region and drops to nearly zero at the halfway in the channel. When TwTin, the molecular number density of the flow drops rapidly near the inlet and the temperature of the gas flow increases along the channel. As Tw increases, the flow becomes more rarefied, the mass flowrate decreases, and the resistance at the entrance region increases. Furthermore, when Tw>Tin, a sudden jump of heat transfer flux and temperature are observed at the exit region of the channel.

Heat and mass transfer characteristics in reforming micro-reactor with micro-pin-fin arrays

Fluid Flow and Heat Transfer Performance in a Micro-Reactor with Non-Uniform Micro-Pin-fin Arrays for Hydrogen Production at Low Reynolds Number

Effect of Tip Clearance on the Heat Transfer and Pressure Drop Performance in the Micro-Reactor with Micro-Pin–fin Arrays at Low Reynolds Number

Numerical Modeling of Microchannel Reactor with Porous Surface Microstructure Based on Fractal Geometry

Effects of Structural Parameters on the Performance of a Micro-Reactor with Micro-Pin-fin Arrays (MPFAR) for Hydrogen Production

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Flow Manifold Optimization for a Uniform Velocity Distribution in a Laminated Microreactor with Micro‐Pin‐Fin Arrays

Heat Transfer and Fluid Flow Characteristics of Combined Microchannel with Cone-Shaped Micro Pin Fins

HEAT TRANSFER IN COMBINED MICROCHANNEL WITH CONE-SHAPED MICRO PIN FINS BASED ON ENTROPY GENERATION ANALYSIS

Study on the Flow and Heat-Transfer Properties of Microchannel Heat Sink with Different Pin-Fin Shapes

Simulation of the Effect of the Structure and Location of Non-Closed Droplet Microchannel on Flow/ Thermal Performance

Influence of heating load on heat transfer characteristics in micro-pin-fin arrays

An experimental and numerical study of flow and heat transfer in channels with pin fin-dimple and pin fin arrays

Computational Fluid Dynamics Modeling of Thermally Integrated Microchannel Reforming Reactors for Hydrogen Production

An Experimental Study Of Transitional Flow Friction And Heat Transfer Performance Of A Channel With Staggered Arrays Of Mini-Scale Short Pin Fins

Using Direct Simulation Monte Carlo with Improved Boundary Conditions for Heat and Mass Transfer in Microchannels

Experimental and Numerical Investigation of Hydrothermal Performance of a Microchannel Heat Sink with Pin Fins

Numerical Study on Heat Transfer in a Microchannel with Micro-fins

Flow and Heat Transfer Characteristics of Micro Pin-Fins under Jet Impingement Arrays

Experimental Study on Flow and Heat Transfer Characteristics in Rectangular Microchannel

Hydraulic and Thermal Performance of Microchannel Heat Sink Inserted with Pin Fins