Abstract:A microchannel reactor with a porous surface catalyst support has been applied to methanol steam reforming (MSR) for hydrogen production. The fluid flow, heat transfer, and hydrogen production efficiency of the microchannel reactor are significantly affected by the fabricated porous surface support, such as the pore sizes and their distributions. This paper presents a novel microchannel reactor with a gradient porous surface as the reaction substrate to enhance the performance of the microreactor for hydrogen production. Numerical modeling of the gradient porous surface is developed based on fractal geometry, and three different types of porous surfaces as the catalyst supports (two gradient porous surfaces and one uniform pore-size surface) are investigated. The fluid flow and heat transfer characteristics of these three types of microchannel reactors are studied numerically, and the results showed that the microreactor with a positive gradient pore sized surface exhibited relatively better overall performance. Experimental setups and tests were performed and the results validate that the microchannel reactor with a positive gradient porous surface can increase the heat transfer performance by up to 18% and can decrease the pressure drop by up to 8% when compared to a microreactor with a uniform pore sized surface. Hydrogen production experiments demonstrated that the microreactor with positive gradient pore sizes has the highest methanol conversion rate of 56.3%, and this rate is determined to be 6% and 9% higher than that of microreactors with reverse gradient porous surfaces and uniform pore sized surface, respectively.

Effects of Structural Parameters on the Performance of a Micro-Reactor with Micro-Pin-fin Arrays (MPFAR) for Hydrogen Production

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Fluid Flow and Heat Transfer Performance in a Micro-Reactor with Non-Uniform Micro-Pin-fin Arrays for Hydrogen Production at Low Reynolds Number

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Heat and mass transfer characteristics in reforming micro-reactor with micro-pin-fin arrays

An Experimental Study on Micro Thixoforming Processing Parameters for Reaction Plate with Micro-Pin-Fin Arrays

Flow Manifold Optimization for a Uniform Velocity Distribution in a Laminated Microreactor with Micro‐Pin‐Fin Arrays

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

Numerical Modeling of Microchannel Reactor with Porous Surface Microstructure Based on Fractal Geometry

Research on the Hydrogen Production Performance of Methanol Reforming Microchannels with Multi-Scale Structures

Porous Copper Fiber Sintered Felts with Surface Microchannels for Methanol Steam Reforming Microreactor for Hydrogen Production

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

Effect of Microchannel Size on Performance of Methanol Steam Reforming

Hydrogen Production from Cylindrical Methanol Steam Reforming Microreactor with Porous Cu-Al Fiber Sintered Felt

Structural design and performance research of methanol steam reforming microchannel for hydrogen production based on mixing effect

Fabrication of Porous Metal by Selective Laser Melting As Catalyst Support for Hydrogen Production Microreactor

Effects of fin structure size on methane-steam reforming for hydrogen production in a reactor heated by waste heat

Hydrogen absorption performance investigation of a cylindrical MH reactor with rectangle heat exchange channels