Abstract:In order to improve the heat transfer performance of microchannels, considering from balance flow resistance and increasing heat transfer area , a non-closed droplet pin fin array microchannel has been designed. The purpose of this paper is to study the inner influence of non-closed droplet structure on convection heat transfer by means of simulation. Through the simulation tool ANSYS Fluent, the working conditions of heat flux density from 5 W/cm2 to 85 W/cm2 are simulated respectively, with the inlet flow as 1.5 kg/h and the inlet fluid temperature as 40 °C unchanged. Along with the increase of heat flux density (5 W/cm2 ⩽ q ⩽ 85 W/cm2), the pressure drop, the bottom temperature as well as the heat transfer coefficient continue to rise, but the rising rates are various. Such variation could be explained by the different heat exchange processes: single phase heat transfer, bubble nucleation, growth and migration and then dry phenomenon, which can be observed from the vapor phase distribution results. The distribution of vapor phase under multiple heat flux explains the variation of pressure and temperature in different stages. It could be concluded that the non-closed droplet pin fin has a strong fractal effect on the fluid. After multiple shunting and confluence, the flow velocity of the fluid on both sides is significantly greater than that between the fins, whose average velocity is 0.135 m/s faster than that between the pins. Besides, the heat transfer effect of the corresponding walls on both sides is also better than that between the pin fins. Because the pin fin has the characteristics of droplet structure, the boundary layer on both sides of the pin fin will be separated and the heat transfer performance will be enhanced. The temperature of the pin fin head is lower, and the temperature of the pin fin tail is higher, with an average difference as about 9.32 °C. The comparison research between non-closed droplet and traditional droplet pin fin has been conducted, as well. It could be concluded that when 5 W/cm2< q < 60 W/cm2, the heat transfer coefficient of the opening droplet microchannel is higher, with pressure drop lower. The main reason is that the improvement of the non-closed structure reduces the kinetic energy loss caused by the collision, and promotes the emergence and growth of the vaporization core.

Numerical study of the influence of pin fin arrangement and volume fraction on the heat transfer and fluid flow phenomena within open microchannels

Fluid Flow and Heat Transfer Performance in a Micro-Reactor with Non-Uniform Micro-Pin-fin Arrays for Hydrogen Production at Low Reynolds Number

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Numerical study of the intensification of single-phase heat transfer in a sandwich-like channel using staggered miniature-pin fins

Effect of variation in heights of cylindrical pinfins on the thermo-hydraulic performance of an open-microchannel heat sink

Heat and mass transfer characteristics in reforming micro-reactor with micro-pin-fin arrays

Research on the mechanism of heat transfer enhancement in microchannel heat sinks with micropin fins

Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids

Numerical study of the effects of nanorod aspect ratio on Poiseuille flow and convective heat transfer in a circular minichannel

Effect of fin shapes on flow boiling heat transfer with staggered fin arrays in a heat sink

Heat Transfer Enhancement of Microchannel Heat Sink Using Sine Curve Fins

Comparative studies on heat transfer and flow resistance of nanofluid in microchannels with different sidewall micro-fins

Numerical Simulation of Flow and Heat Transfer Characteristics in Non-Closed Ring-Shaped Micro-Pin-Fin Arrays

Numerical Study on Heat Transfer Performance of a New-proposed Pin-fin in an Internal Channel

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Numerical Study of the Temperature Effects on Heat Transfer Coefficient in Mini-Channel Pin-Fin Heat Sink

Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal

Numerical investigation of flow and heat transfer characteristics in smooth, sinusoidal and zigzag-shaped microchannel with and without nanofluid

Effect of shape and distribution of pin-fins on the flow and heat transfer characteristics in the rectangular cooling channel

Numerical study and optimization of thermal efficiency for a pin fin heatsink with nanofluid flow by modifying heatsink geometry

The simulation analysis on the influence of non-closed droplet structure on thermal/ flow performance of pin fin heat sinks