Abstract:Methanol is a prospective hydrogen storage medium that holds the potential to address the challenges of hydrogen storage and transportation. However, hydrogen production via methanol steam reforming faces several key obstacles, including high reaction temperature (e.g., 250–300 °C) and low methanol conversion (at <200 °C), while the purification procedure of hydrogen is commonly required to obtain high-purity H2. A novel method of H2 absorption-enhanced steam reforming of methanol is proposed to overcome the challenges mentioned above. The method involves the absorption and separation of H2 using an absorbent to facilitate the forward shift of the reaction equilibrium and enhance reaction performance. A thermodynamic analysis using the equilibrium constant method presents that the separation of H2 can improve the methanol conversion rate and the total H2 yield. The feasibility of the method is validated through experiments in a fixed-bed reactor (4 mm diameter, 194 mm length) under the conditions of 200 °C and 1 bar. In the experiments, 1 g of bulk catalyst (CuO/ZnO/Al2O3) and 150 g of bulk hydrogen absorbent (Aluminum-doped lanthanum penta-nickel alloy, LaNi4.3Al0.7 alloy) are sequentially loaded into the reactor. As a proof of concept, a CO2 concentration of 84.10% is obtained in the reaction step of the first cycle, and a gas stream with an H2 concentration of 81.66% is obtained in the corresponding regeneration step. A plug flow reactor model considering the kinetics is developed to analyze the effects of the number of cycles and H2 separation ratio on the enhancement performance. The method indicates a high potential for commercialization given its low reaction temperature, high-purity H2, and membrane-free design.

Sliding Mode Control of Hydrogen Production Via Autothermal Reforming of Methanol.

Adaptive Control Design for Hydrogen Production Via Autothermal Reforming of Methanol

Controller design and experiment for autothermal reforming of methanol in miniature reactor.

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Improved optimization methods for refinery hydrogen network and their applications

Design and Optimization of Flexible Hydrogen Systems in Refineries

Automatic Design of Multi-Impurity Refinery Hydrogen Networks Using Mixing Potential Concept

Simultaneous Optimization Of Hydrogen Network With Desulfurization Processes Embedded

Computational modelling of methanol autothermal reforming phenomena in microchannel reactors for hydrogen production

Design and optimization of hydrogen production system model for dimethyl ether self-heating steam reforming

A Coordinating Control Strategy for Autothermal Fuel Reforming Systems

Modeling and analysis for enhanced hydrogen production in process simulation of methanol reforming

Progress on Methanol Reforming Technologies for Highly Efficient Hydrogen Production and Applications

Design and optimization of reforming hydrogen production reaction system for automobile fuel cell

Two degrees of freedom control of a multistage power-to-methanol reactor

Nonlinear control of an autothermal fuel reforming system

Thermal matching characteristics in an autothermal methanol reforming microchannel reactor for hydrogen production

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

Hydrogen production and temperature control for DME autothermal reforming process

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture