Abstract:Traditionally, the control design of Organic Rankine Cycle (ORC) is sequential. The operating condition is obtained first by steady-state optimization, and then the controller is designed around the operating condition. Since the fluctuating nature of the heat source is not considered in the design of operating conditions, it is easy to violate the constraints of the ORC system during the operation. It is, therefore, of paramount importance to integrate the closed-loop dynamic performance analysis into the design of operating conditions to make sure the dynamic feasibility. An integrated design and control approach of the ORC system is proposed based on the mechanistic nonlinear model of the ORC system. It maximizes the waste heat recovery and guarantees the safe operation in the presence of disturbances. The optimal operating conditions and the controller parameters are obtained simultaneously through a nonlinear constrained optimization problem. The performance comparison between the integrated design and control approach and the sequential control design reflects the advantages of the proposed integrated approach. Its results with different control strategies (PI controllers with static feed-forward and PI controllers without static feed-forward) show that a well-behaved controller can improve heat recovery and the effectiveness of the proposed method.

A Coordinating Control Strategy for Autothermal Fuel Reforming Systems

Nonlinear control of an autothermal fuel reforming system

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Adaptive Control Design for Hydrogen Production Via Autothermal Reforming of Methanol

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Control Lyapunov Function Based Control Strategy For Air Supply System Of Pem Fuel Cells

A Thermal Management Strategy for Proton Exchange Membrane Fuel Cell via Nonlinear Model Predictive Control

A New Nonlinear Optimal Control Design Approach for a Chemical Reactor

Modeling and Simulation of Commercial Catalytic Reformers

Sliding Mode Control of Hydrogen Production Via Autothermal Reforming of Methanol.

Integrated Operation Design and Control of Organic Rankine Cycle Systems with Disturbances

Implementation Of Advanced Control For A Heat-Integrated Distillation Column System

The Predictive Control Of The Liquid Level Of The Pre-Fractionating Tower Of A Catalyzing Reforming Plant

Controller design and experiment for autothermal reforming of methanol in miniature reactor.

Fuel cell based auxiliary power unit modeling, optimization, and control

Modeling and Control of a Continuous Stirred Tank Reactor Based on a Mixed Logical Dynamical Model

Economic Operation of a Fluid Catalytic Cracking Process Using Self-Optimizing Control and Reconfiguration

FCCU Reactor - Regenerator Advanced Control

System Modeling and Temperature Control for a Fuel Cell System Based on Local Model Networks

Reactor Model of Counter-Current Continuous Catalyst-Regenerative Reforming Process toward Real Time Optimization

Model-Based Temperature Tracking Control in Automotive Fuel Cells