Abstract:Jet fuel is used as a coolant before it is burned in the combustor of the aircraft. Insoluble particles and surface deposits can impair engine performance. Jet fuel thermal oxidation test (JFTOT) defines the standard test method for evaluation of the deposit formed through heating fuels in tubes caused by thermal oxidation (<400°C). At a higher temperature, fuel in the heating process decomposes leading to surface deposits by coking. In this work, we propose a method to evaluate the security of fuel flowing in the tube at high temperatures (>500°C). The heat transfer and cracking performances of two hydrocarbon fuels which are laboratory modified aviation kerosene (Fuel 1 (ρ=0.85g/cm3) and Fuel 2 (ρ=0.78g/cm3)) have been investigated in a heat-exchanger under supercritical conditions (T=700–770°C, p=2.5–5.5MPa, m=0.4–1.0g/s). The temperature and flow rate in this work are much higher than those in JFTOT. The safe run time (SRT) is used to evaluate the heat transfer security of each fuel. As the temperature increases or the flow rate decreases or the pressure increases, the SRTs of Fuel 1 and Fuel 2 decrease clearly. In general, the heat transfer security of Fuel 1 is better than that of Fuel 2. Moreover, the volumetric heat sink of Fuel 1 is larger than that of Fuel 2. So, the overall performance of Fuel 1 is more excellent when it is used as propellant and coolant for hypersonic aircraft. In consideration of the heat transfer security, heat sink and the required driving force for aircraft, the temperature of fuel at the exit of heat transfer passage should be set as 740°C, the flow rate of fuel should be 0.6–1.0g/s, the pressure of heat transfer passage should be 3.5MPa. Based on these results, we find that the modification of a high density fuel is an effective way to prepare an advanced hydrocarbon fuel.

Experimental Study on the Ethanol-Assisted Catalytic Steam Reforming of Endothermic Hydrocarbon Fuel.

Heat Sink and Conversion of Catalytic Steam Reforming for Hydrocarbon Fuel

Coke Deposition Inhibition for Endothermic Hydrocarbon Fuels in a Reforming Catalyst-Coated Reactor

Cooling and coke deposition of hydrocarbon fuel with catalytic steam reforming

Endothermic Reaction of High Heat Sink Hydrocarbon Jet Fuel

Interaction Between Thermal Cracking and Steam Reforming Reactions of Aviation Kerosene

A comprehensive review of the thermal cracking stability of endothermic hydrocarbon fuels

Research Progress in Improvement of Thermal Management Capacities of Endothermic Hydrocarbon Fuels

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Modeling and Numerical Investigations of Flowing N-Decane Partial Catalytic Steam Reforming at Supercritical Pressure

Experimental and Subsequent Mechanism Research on the Steam Reforming of Ethanol over A Ni/Ceo2 Catalyst

Coke Suppression of Kerosene by Wall Catalytic Steam Reforming

Large Eddy Simulations of Heat Transfer and Thermal Oxidative Coking of Aviation Kerosene in Vertical U-Tube at a Supercritical Pressure

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Experimental study of hydrogen catalytic combustion wall temperature distribution characteristics and its effect on the coupling performance of autothermal reformers

Heat Transfer and Thermal Cracking Behavior of Hydrocarbon Fuel

Heat Management in Supersonic/Hypersonic Vehicles Using Endothermic Fuel: Perspective and Challenges

Thermal Cracking and Catalytic Cracking of the Mixing Endothermic Hydrocarbon Fuel

Experimental study on catalytic ignition

Simulation and enhancement of axial temperature distribution in a reactor filled with in-situ electrically heated structured catalyst

Heat Transfer and Cracking Performance of Endothermic Hydrocarbon Fuel when It Cools a High Temperature Channel