Abstract:The pyrolysis of endothermic hydrocarbon fuel plays a vital role in regenerative cooling channels. Based on previous experiments and mechanism models of n-decane, and considering the impact of the secondary reaction at high conversion, the present work establishes a cracking reaction model of n-decane containing 16 species and 26 reactions. One-dimensional plug flow reactor simulation verifies that the model has high accuracy in predicting species distribution. The high-accuracy model is applied to the computational fluid dynamics (CFD) simulation of the supercritical cracking heat transfer, and compared with the results of a one-step global model as the chemistry model. The results show that the high-accuracy model is more accurate in terms of fuel conversion, temperature, and product distribution. Furthermore, the reasons for the difference of the two chemistry models in the CFD simulation are analyzed from the perspective of chemical kinetics. The new model generates more products of small molecules due to the consideration of secondary reactions. However, for the one-step model, it mainly cracked into large molecules even at high conversion. The product distribution affects the chemical endotherm and then the fuel temperature, which in turn affects the reaction rate and finally the conversion of the fuel. In addition, pyrolysis affects the properties of the fuel, which in turn affects the convective heat transfer. Among the several influencing factors of heat transfer, the correction factor of isobaric specific heat, which is the ratio of the specific heat of fluid to the average specific heat, can well reflect the changing trend of the convective heat transfer coefficient. The present work demonstrates the important role of the kinetic model in the simulation of the supercritical cracking heat transfer process, and the corresponding methods can be used in the design of regenerative cooling systems.

Thermal Cracking and Catalytic Cracking of the Mixing Endothermic Hydrocarbon Fuel

ZSM-5 Crystals Grown on the Wall of a Long Tubular Reactor As a Structured Catalyst for Cracking of Endothermic Fuels

Low-Temperature-Initiated Cracking of Hydrocarbons to Produce Olefins: Simulation and Comparison of Different Initiators

Preparation and Catalytic Properties of ZSM-5 Zeolite Films on FeCrAl Alloy Grids

A comprehensive review of the thermal cracking stability of endothermic hydrocarbon fuels

Experimental Study on the Combustion of Thermally Cracked Endothermic Hydrocarbon Fuel

Thermal cracking performance of Al-nanoparticle-containing nanofluids

Research Progress in Improvement of Thermal Management Capacities of Endothermic Hydrocarbon Fuels

Catalytic Cracking of JP-10 on Zeolite ZSM-5

STUDY ON PYROLYSIS-CRACKING COKE OF ENDOTHERMIC HYDROCARBON FUELS

Heat Transfer and Thermal Cracking Behavior of Hydrocarbon Fuel

Cracking of Platinum/hydrocarbon Nanofluids with Hyperbranched Polymer As Stabilizer and Initiator

Endothermic Reaction of High Heat Sink Hydrocarbon Jet Fuel

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Experimental Study on the Ethanol-Assisted Catalytic Steam Reforming of Endothermic Hydrocarbon Fuel.

Thermal Cracking of Jet Propellant-10 with the Addition of a Core-Shell Macroinitiator

Bifunctional catalyst with high efficiency for converting hydrocarbons: The enhanced diffusion between micro and meso-pores

Synergetic Regulation of the Microstructure and Acidity of HZSM-5/MCM-41 for Efficient Catalytic Cracking of n-Decane

Numerical Investigations on the Molecular Reaction Model for Thermal Cracking of n-Decane at Supercritical Pressures.

Thermal Cracking and Heat Sink Measurement of Model Compounds of Endothermic Hydrocarbon Fuels under Supercritical Conditions

Experimental Investigations of Laminar and Turbulent Burning Velocities of Thermally Cracked Hydrocarbon Fuels