Abstract:Using the Raney Fe-Al alloy as the precursor for Fe and Al, and tetrapropylammonium hydroxide (TPAOH) as both the base for the leaching of the alloy and the template for the synthesis of HZSM-5, we synthesized the skeletal Fe core-HZSM-5 shell catalysts (Raney Fe@HZSM-5) via a facile one-pot hydrothermal strategy. The thickness of the zeolite shell was adjusted by varying the hydrothermal time. The catalysts were characterized by inductively coupled plasma-atomic emission spectroscopy (ICP-AES), N-2 physisorption, X-ray powder diffraction (XRD), temperature-programmed desorption of NH3 (NH3-TPD), and scanning electron microscopy (SEM). It was identified that the Raney Fe-Al alloy was more suitable than the rapidly quenched Fe-Al alloy as the precursor to the skeletal Fe core, since the skeletal Fe catalyst alkali-leached from the former produced more long-chain hydrocarbons during the Fischer-Tropsch synthesis (FTS) reaction for successive cracking and isomerization. A complete HZSM-5 shell was obtained only after above 24 h of hydrothermal treatment. With the hydrothermal time from 2 d to 8 d, the thickness of the compact HZSM-5 shell increased from 1.3 mu m to 9.7 mu m, the relative crystallinity increased steadily, while the SiO2/Al2O3 ratio remained essentially constant, and the amount of the acid sites is parallel to the thickness of the zeolite shell. In the FTS reaction using syngas with the H-2/CO molar ratio of 2 and at 543 and 2.0 MPa, the CO conversion and the selectivity to the gasoline fraction (C-5 similar to C-11 hydrocarbons) evolved in a volcanic trend with the shell thickness, suggesting the existence of an optimal amount of the acid sites, while less or more is adverse to the activity and selectivity to the gasoline fraction. The Raney Fe@HZSM-5 catalyst hydrothermally treated for 4 d exhibited the highest CO conversion of 92% and the selectivity to the gasoline fraction of 71%, along with an iso-paraffin to n-paraffin ratio of 1.9. At the n(H-2)/n(CO) ratio of 1, the selectivity to the gasoline fraction and the iso-paraffin to n-paraffin ratio were further improved to 73% and 2.1, respectively, which shows promise for this catalyst to transform the coal- or biomass-derived syngas to high-octane number gasoline.

Preparation and Catalytic Properties of ZSM-5 Zeolite Films on FeCrAl Alloy Grids

Preparation and catalytic performance of FAU-type zeolite films supported on FeCrAl grids

ZSM-5 Crystals Grown on the Wall of a Long Tubular Reactor As a Structured Catalyst for Cracking of Endothermic Fuels

Influence of Alkali Treatment on Structure and Catalytic Performance of ZSM-5 Films

In-situ Growth of ZSM-5 Crystals on the Surface of High Temperature Alloy Substrates

Influence of Surface Modification of Metallic Substrate on In-Situ Growth and Adhesion Strength of ZSM-5 Films

Catalytic oxidation of isoamyl alcohol on modified ZSM-5 molecular sieve catalysts prepared by different methods

Catalytic Cracking of Endothermic Fuels over Meso-HZSM-5/MCM-41 Coatings

Preparation of nano ZSM-5 with hydrophobic surfaces and application to catalytic cracking of hydrocarbon fuels

Al-Sn Bimetallic ZSM-5: Acidity Regulation and Excellent Performance in Cracking N-Hexane for Production of Light Olefins

Fabrication of AC@ZSM‐5 Core‐shell Particles and Their Performance in Fischer–Tropsch Synthesis

Catalytic cracking of n-hexane over HZSM-5 zeolites

PREPARATION OF ZSM-5 MOLECULAR SIEVE WITH MESOSTRUCTURE AND ITS APPLICATION IN CATALYTIC CRACKING

Facile synthesis of hierarchical nanocrystalline ZSM-5 zeolite under mild conditions and its catalytic performance.

Preparation and Characterization of Fe-containing Mesoporous HZSM-5 Catalysts for Automotive Exhaust Cleaning

Catalytic Cracking of N-Hexane to Light Alkene over ZSM-5 Zeolite: Influence of Hierarchical Porosity and Acid Property

Controllable Fabrication and Catalytic Performance of Nanosheet HZSM‐5 Films by Vertical Secondary Growth

Synthesis of pillared nanosheet HZSM-5 zeolite films for catalytic cracking of supercritical n-dodecane

Strategies To Enhance The Catalytic Performance Of Zsm-5 Zeolite In Hydrocarbon Cracking: A Review

Hierarchical ZSM-5 zeolite designed by combining desilication and dealumination with related study of n-heptane cracking performance

Effect of Shell Thickness on Skeletal Fe@HZSM-5 Core-Shell Catalysts for Fischer-Tropsch Synthesis