Abstract:Mordenite and ZSM-5 seeds could grow on the surface of an asymmetric α-Al2O3 support using an identical organic-free aluminosilicate solution under the same hydrothermal conditions. It suggests that the phase of zeolite can be controlled by varying the type of seed. Continuous mordenite and ZSM-5 membranes were prepared by the secondary growth method using corresponding seeds under appropriate conditions. The water content in the secondary growth mixture strongly influenced the growth of zeolite crystals. ZSM-5 seeds grew at a smaller rate and showed a habit of thin hexagonal plate in a concentrated mixture, while the crystals with a habit of rectangular parallelepiped were formed from a diluted secondary growth mixture. ZSM-5 crystals had poor intergrowth in the former case, whereas the crystals were highly intergrown in the latter case. ZSM-5 crystals in either membrane have a random orientation. In contrast to ZSM-5 zeolite, the crystal orientation in the secondary grown mordenite membranes strongly depended on the water content in the secondary growth mixture. The crystals in the mordenite membrane developed in a diluted secondary growth mixture were oriented with the (150) face parallel to the support surface, whereas the crystals in the membrane grown in a concentrated mixture were oriented with the (002) face parallel to the support surface. These results suggest that the crystal orientation in mordenite membranes can be manipulated only by changing the water content in a secondary growth mixture. The formation of the preferred crystal orientation in the secondary grown mordenite membrane is discussed in terms of an “evolutionary selection” process.

In-situ Growth of ZSM-5 Crystals on the Surface of High Temperature Alloy Substrates

Influence of Surface Modification of Metallic Substrate on In-Situ Growth and Adhesion Strength of ZSM-5 Films

ZSM-5 Crystals Grown on the Wall of a Long Tubular Reactor As a Structured Catalyst for Cracking of Endothermic Fuels

Influence of Alkali Treatment on Structure and Catalytic Performance of ZSM-5 Films

Preparation and Catalytic Properties of ZSM-5 Zeolite Films on FeCrAl Alloy Grids

Hydrothermal Synthesis of ZSM-5 Coatings Strongly-Adhered on Stainless Steel Supports

The control of phase and orientation in zeolite membranes by the secondary growth method

Optimization of crystal growth of sub-micron ZSM-5 zeolite prepared by using Al(OH)3 extracted from fly ash as an aluminum source

Crystallization Process of Zeolite ZSM-5 and Zeolite ZSM-35 in a Special Autoclave

Evolution of Aggregate-Like ZSM-5 Crystals

Research on In-Situ Synthesis of ZSM-5 Molecular Sieve on Kaolin Microspheres by Crystal Seed Method

SYNTHESIS OF ZSM-5 ZEOLITE MEMBRANE ON DIFFERENT CARRIERS BY ONE STEP IN SITU HYDROTHERMAL METHOD

Oriented Zeolite Mfi Monolayer Films on Metal Substrates by in Situ Crystallization

Optimization of crystal growth of hierarchical porosity ZSM-5 zeolite based on coal fly ash "waste utilization"Optimierung des Kristallwachstums hierarchischer Porositat ZSM-5-Zeolith auf Basis von Kohlenflugasche Mull-Verwendung"

Controlling Crystal Transformation Between Zeolite Zsm-5 and Mordenite Without Organic Structure-Directing Agent

A Seed Surface Crystallization Approach for Rapid Synthesis of Submicron ZSM-5 Zeolite with Controllable Crystal Size and Morphology

Understanding Of The Dissolution-Crystallization Fabrication Strategy Towards Macro/Microporous Zsm-5 Single Crystals

Origin of Morphology Change and Effect of Crystallization Time and Si/Al Ratio during Synthesis of Zeolite ZSM‐5

Effect of Surface Structure and Adsorption Activity on Implanting of b-Oriented ZSM-5 Zeolite Film on Modified α-Quartz Substrate

In-situ conversion of Al-SBA-15 wall structures to monolithic ZSM-5 nanoparticle aggregates

Crystallization of Sub-Micrometer Sized ZSM-5 Zeolites in SDA-Free Systems