Abstract:Currently, 3D integration is considered to be the most promising development direction forchip industry. It relies on the through-silicon via (TSV) structure to achieve mechanical and electrical interconnection in the vertical direction. The manufacturing of TSV is usually accomplished by etching technique, which can produce a hole with high aspect ratio by removing the material from a specific area physically or chemically. At present, the mainstream TSV manufacturing methods include KOH wet etching, laser drilling, deep reactive ion etching and photo-assisted electrochemical etching. However, a cross-sectional comparison of their characteristic was lacking in the literature. This review aims to provide a comprehensive summary for four kinds of mainstream TSV etching methods, i.e., KOH wet etching, laser drilling, deep reactive ion etching and photo-assisted electrochemical etching, including their etching mechanism, process, parameters and hole structure. Finally, this paper summarizes and prospects the four methods for TSV etching, providing researchers and engineers with an extensive and updated understanding of the principles and applications for these four mainstream TSV etching methods.

Fabrication Technology of Micro Through-hole on Silicon Wafer

Through wafer via technology for 3-D packaging

Metal Microstructure Microfabrication Technique

Fabrication of Via-hole on Pyrex7740 Glass Wafer by HF Wet- Etching Technique

Fabrication of Micro-Hole Arrays in Silicon Using Femtosecond Laser Irradiation and Acid Etching

Development & Applications of Through Wafer Interconnect Technology

MEMS Microfabrication Technology Based on Rapid ProtoTyping

Fabrication Of Integrated Waveguide Turning Mirror On Silicon-On-Insulator

Silicon Micromachining Of High Aspect Ratio, High-Density Through-Wafer Electrical Interconnects For 3-D Multichip Packaging

Fabrication of PDMS micro through-holes using micromolding in open capillaries

Fabrication of Silicon-based Microstructures and Its Application in Microchips

Microfabrication Technique and Micro-Opto-Electro-Mechanical Systems

Microfabrication Technology of Three-Dimensional Microdevices and Their Mems Applications

The Technology of Using Porous Silicon As a Sacrificial Layer in MEMS

Fabrication and Analysis of a Fabry-Perot Cavity with a Micromechanical Wet-Etching Process.

The key technologies in silicon based microwave and RF MEMS device fabrication

Application of Femtosecond Laser Irradiation and Wet Etching in Fabrication of Microstructures in Crystal Materials

Fabrication of through holes in silicon carbide using femtosecond laser irradiation and acid etching

Fabrication of ultra-deep high-aspect-ratio isolation trench without void and its application

Silicon microstructuring technology

A review on the mainstream through-silicon via etching methods