Abstract:Micro-air-gap-based extrinsic Fabry-Perot interferometers (EFPIs) are used for a variety of applications in sensing and communications, and are typically made by manual cleaving or hydrofluoric acid etching.1–4 They offer a number of useful properties including in-line operation from an all-fiber device, compactness, and good temperature stability. Mass-producing EFPIs is difficult, however, because the process involves manual alignment, assembly, and adhesion. This increases the cost and variability between devices. We report the first demonstration of a fiber in-line etalon with a self-enclosed cavity that has excellent characteristics. This etalon is fabricated using 157nm laser micromachining. Its properties include excellent interferometric fringe visibility of up to ∼30dB, which we believe is the best visibility yet reported for an all-fiber in-line etalon. It also offers great mass-production potential: good reproducibility and low cost are possible because the laser micromachining process can be automated. Finally, this etalon design offers excellent temperature stability. The 157nm laser micromachining system consists of a pulsed laser, an optical focusing system with 25 × demagnification, an observing system, and a precise translation stage system (see Figure 1). Because the 157nm source has high single-photon and pulse energy and a high absorption coefficient for many materials, it offers ideal characteristics for high quality micromachining. The process of forming the self-enclosed fiber Fabry-Perot (FP) cavity is shown in Figure 2. First, a circular micro-hole with a typical depth and diameter of tens of micrometers is made at the tip of a cleaved optical fiber by the 157nm laser. Next, an inline FP cavity is enclosed by simply splicing the first fiber to another cleaved fiber. Hence, such a micro etalon can be operated in high temperature environments of up to ∼800◦C and the selfclosed structure makes the etalon robust, stable, and reliable. It is also insensitive to temperature change due to the hollow core Figure 1. Schematic of the micromachining system with a 157nm excimer laser.

Fabrication and Analysis of a Fabry-Perot Cavity with a Micromechanical Wet-Etching Process.

Novel Method of Fabricating Fabry-Perot Cavity Employing MEMS Wet-Etching Process

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

A New Route for Fabricating Polymer Optical Microcavities.

Fabrication of Optical Cavities with Femtosecond Laser Pulses

An On-Line Fiber Cutting-Welding Method for the Fabrication of Fabry-Perot Micro-Cavity

Three-dimensional Fabry–Pérot cavities sculpted on fiber tips using a multiphoton polymerization process

Fabrication of Fabry-Pérot Optical Microcavity Array Based on CO2 Laser Processing

Optical Properties of Direct Wafer Bonded Micro-Cavity Structures

High-Q Fabry-Pérot Cavity Based on Micro-Lens Array for Refractive Index Sensing

Antiresonant Fabry-P?rot cavity with ultralow finesse

An Efficient Non-Invasive Method to Fabricate In-Fiber Microcavities Using a Continuous-Wave Laser

Arc Discharge Method to Fabricate Large Concave Structures for Open-Access Fiber Fabry-Pérot Cavities

Facile microfluidic fabrication of monodispersed self-coupling microcavity with fine tunability

Fabrication of a Fabry-Pérot dielectric filter with sub-nanometer narrow bandwidth

Analysis and numerical simulation of a novel optical microcavity with the roof structure

Fabricating In-Line Fiber Etalons Efficiently

High Finesse Fiber Fabry-Perot Cavities: Stabilization and Mode Matching Analysis

A Tunable Fiber-Optic Fabry–Perot Cavity Formed Between a Silica Microsphere and a Target