Abstract:A variety of micro-optics structures can be fabricated using a dual-step anisotropic etching of KOH: H2O over (100) silicon. A key step of this method is the design of mask layout. In accordance with the expected profile, this paper implemented a set of algorithms through computer programming to design the mask, and after setting a set of parameters, the final etching profile can be simulated. According to the data of the mask layout generated by the program, a lithography mask is fabricated, and then through the single-step lithography and dual-step wet etching, the expected profile is acquired. The mask can be fast and efficiently designed using this method, and through follow-up procedures, many kinds of aspherical and irregular micro-structures can be obtained. In this study, a series of 512x512 arrays of concave lenses are designed using the algorithm, and then the follow-up procedures are carried out using the most appropriate corrosion issues calculated by the program, and finally get a good result. At the end of this study, the lens' surface profile, roughness, and optical performance, etc, are tested. Test results show that the micro lens are very neat, and the hole size and depth of each unit have basically the same size. The surface profile and roughness already achieve optical mirror requirements, and the structures have good optical performances.

Fabrication of Silicon-based Microstructures and Its Application in Microchips

Fabrication of 2D silicon nano-mold by side etch lift-off method

Fabrication of Optofluidic Systems Using Isotropic Wet Etched Masters in < 111 > Silicon Wafer

Metal Microstructure Microfabrication Technique

Method for Fabricating Micro/Nanostructures Via Scanning Probe Microscope and Anisotropic Wet Etching

Fabrication Of Microfluidic Chips By An Ultrasonic Micromachining With Wet-Etch Smoothing Method On Glass Substrates

Fabrication of CE Microchip Based on SU8 and PMMA

Multi-layer Microstructure Fabrication by Combining Bulk Silicon Micromachining and UV-LIGA Technology

Fabrication of silicon-based multilevel nanostructures via scanning probe oxidation and anisotropic wet etching

Post-CMOS Process for High-Aspect-ratio Monolithically Integrated Single Crystal Silicon Microstructures

A New Fabrication Method for 3D Multilayer Microstructure

Fabrication and Characterization of Squama-Shape Micro/nano Multi-Scale Silicon Material

A molded surface-micromachining and bulk etching release (MOSBE) fabrication platform on (1 1 1) Si for MOEMS

Complex microstructure fabrication by integrating silicon anisotropic etching and UV-LIGA technology

Fabrication Technology of Micro Through-hole on Silicon Wafer

Fabrication and surface treatment of silicon mold for polymer microarray

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

Novel polydimethylsiloxane (PDMS) based microchannel fabrication method for lab-on-a-chip application

Bulk Micromachining Fabrication Platform Using the Integration of DRIE and Wet Anisotropic Etching

Fabricating A Variety Of Micro-Optics Structures Using Anisotropic Etching Of Silicon

Wafer-Scale Fabrication of Ultra-High Aspect Ratio, Microscale Silicon Structures with Smooth Sidewalls Using Metal Assisted Chemical Etching