Abstract:A novel micromachining technology for multilevel structures of silicon is described in this paper. Complicated multilevel structures can be formed by using a maskless etching following a conventional masked etching in aqueous KOH. The process consists of two successive steps. First, structures with (111) sidewalls are formed for a desired etching depth on the surface of a (100) silicon wafer by a conventional masked anisotropic etching process with a specially designed etching mask. Then, the etching mask is removed except for some areas (such as the frame of the chip) and a maskless etching follows. In addition to the downward etching of the upper and lower (100) planes during maskless etching, fast-etching (311) planes emerge at the upper edges of the (111) sidewalls and cut the (111) sidewalls, while the (111) sidewalls extend downward at the lower ends. As the (311) planes replace the (111) sidewalls with a rate faster than the extension rate of the (111) planes, the (111) sidewalls will finally be replaced by (311) planes. Moreover, by an appropriate mask design and an appropriate etching depth of the previous masked etching, the bottom areas of some etching cavities diminish temporarily so that the downward etching in these areas is stopped for time intervals after the intersection of (111) planes on the bottom and before the (111) planes are replaced completely by the (311) planes. Once the (111) sidewalls are replaced completely by the (311) planes, the bottom areas reappear and the etching downward resumes. Analyses show that levels with different depths can be created in this way for different window apertures and the number, positions as well as the depths of the new levels can be individually decided by the design of the single mask for masked etching and the etch depths of both masked and maskless etching processes. More than 10 interesting multilevel structures with up to five structure levels have been fabricated. The results show that the technology is very versatile and repeatable. Therefore, this technology is a very useful new tool for making silicon micromechanical structures to meet the ever-increasing demands for solid-state sensors and actuators. (C) 1997 Elsevier Science S.A.

Fabrication of silicon-based multilevel nanostructures via scanning probe oxidation and anisotropic wet etching

Multiple-Patterning Nanosphere Lithography for Fabricating Periodic Three-Dimensional Hierarchical Nanostructures.

A novel micromachining technology for multilevel structures of silicon

Fabrication of in Situ Ultrathin Anodic Aluminum Oxide Layers for Nanostructuring on Silicon Substrate

Novel masked-mask-free etching technology for silicon multilevel microstructures

Fabricating 3D Si nanostructure via a novel Ga+ implantation enabled maskless dry etching process

Maskless Anisotropic Etching-a Novel Micromachining Technology for Multilevel Microstructures

Fabrication of Nanostructures on Si Surface Using Gold Nanoparticle Mask

Fabrication of Silicon Nanopore Arrays with Three-Step Wet Etching

Fabrication and Characterization of Squama-Shape Micro/nano Multi-Scale Silicon Material

Propagation of human hepatitis A virus in cell lines of primary human hepatocellular carcinomas.

Massive Fabrication of Silicon Nanopore Arrays with Tunable Shapes

SCS nano-structures fabricated by hybrid process of HNA selective etching and oxidization

Fabrication Of Inverted-Pyramid Silicon Nanopore Arrays With Three-Step Wet Etching

Fabrication of highly homogeneous and controllable nanogratings on silicon via chemical etching-assisted femtosecond laser modification

Fabrication of Nanopillars Based on Silicon Oxide Nanopatterns Synthesized in Oxygen Plasma Removal of Photoresist

Scanning probe lithography for nanoimprinting mould fabrication

A route to engineered high aspect-ratio silicon nanostructures through regenerative secondary mask lithography

Unconventional Lithography for Patterned Nanomaterials

Proximal probe-like nano structuring in metal-assisted etching of silicon

Reproducible patterning of single au nanoparticles on silicon substrates by scanning probe oxidation and self-assembly.