Abstract:A novel micromachining technology for multilevel structures of silicon is described in this paper. Complicated multilevel structures can be formed by using a maskless etching following a conventional masked etching in aqueous KOH. The process consists of two successive steps. First, structures with (111) sidewalls are formed for a desired etching depth on the surface of a (100) silicon wafer by a conventional masked anisotropic etching process with a specially designed etching mask. Then, the etching mask is removed except for some areas (such as the frame of the chip) and a maskless etching follows. In addition to the downward etching of the upper and lower (100) planes during maskless etching, fast-etching (311) planes emerge at the upper edges of the (111) sidewalls and cut the (111) sidewalls, while the (111) sidewalls extend downward at the lower ends. As the (311) planes replace the (111) sidewalls with a rate faster than the extension rate of the (111) planes, the (111) sidewalls will finally be replaced by (311) planes. Moreover, by an appropriate mask design and an appropriate etching depth of the previous masked etching, the bottom areas of some etching cavities diminish temporarily so that the downward etching in these areas is stopped for time intervals after the intersection of (111) planes on the bottom and before the (111) planes are replaced completely by the (311) planes. Once the (111) sidewalls are replaced completely by the (311) planes, the bottom areas reappear and the etching downward resumes. Analyses show that levels with different depths can be created in this way for different window apertures and the number, positions as well as the depths of the new levels can be individually decided by the design of the single mask for masked etching and the etch depths of both masked and maskless etching processes. More than 10 interesting multilevel structures with up to five structure levels have been fabricated. The results show that the technology is very versatile and repeatable. Therefore, this technology is a very useful new tool for making silicon micromechanical structures to meet the ever-increasing demands for solid-state sensors and actuators. (C) 1997 Elsevier Science S.A.

Novel masked-mask-free etching technology for silicon multilevel microstructures

Maskless Anisotropic Etching-a Novel Micromachining Technology for Multilevel Microstructures

A novel micromachining technology for multilevel structures of silicon

Study on maskless etching of silicon symmetric beam-mass structure in aqueous KOH

Maskless Etching Of Three-Dimensional Silicon Structures In Koh

Fabrication of silicon-based multilevel nanostructures via scanning probe oxidation and anisotropic wet etching

Study on convex-corner undercutting formed by masked-maskless etching in aqueous KOH

Graphene Masks As Passivation Layers in the Electrochemical Etching of Silicon

A novel hardmask-to-substrate pattern transfer method for creating 3D, multi-level, hierarchical, high aspect-ratio structures for applications in microfluidics and cooling technologies

Mask-Free Construction of Three-Dimensional Silicon Structures by Dry Etching Assisted Gray-Scale Femtosecond Laser Direct Writing

Fabricating 3D Si nanostructure via a novel Ga+ implantation enabled maskless dry etching process

Stress-Etching Using Laser Electrochemical Micromachining with Masks

Fabrication of Vertical Sidewalls by Anisotropic Etching of Silicon (100) Wafers

A novel approach for bulk micromachining of 4H-SiC by tool-based electrolytic plasma etching in HF-free aqueous solution

Wet anisotropic etching characteristics of Si{111} in NaOH-based solution for silicon bulk micromachining

Versatile Approach of Silicon Nanofabrication without Resists: Helium Ion-Bombardment Enhanced Etching

Physiochemical Coupled Dynamic Nanosphere Lithography Enabling Multiple Metastructures from Single Mask

Fabrication and Characterization of Squama-Shape Micro/nano Multi-Scale Silicon Material

High Aspect Ratio Si Etching Technique and Application

A New Release Process in Surface Micromachining-Double Mask Technology

Uniform Vertical Trench Etching on Silicon with High Aspect Ratio by Metal-Assisted Chemical Etching Using Nanoporous Catalysts.