Abstract:With the increased use of 2D materials for instrument minimization, research on recrystallization texture of cold-deformed metal foils during annealing becomes attractive, as the recrystallization process is also subjected to external constraints (biaxial thermal strain and surface energy) in addition to the microstructural factors. In this work, the orientation evolution of cold-rolled Cu foils (10 mu m thick) during heating was thoroughly investigated macroscopically by neutron and synchrotron radiation diffraction and microscopically by SEM-EBSD, combined with crystallographic analysis. The results showed that the foils underwent a transition from the cold-rolling texture to a recrystallization texture dominated by two rotated orientations, i.e., RD-rotated Cube and phi(2)-rotated Copper. The transition was screened by both intrinsic microstructural and extrinsic geometrical factors. The orientations of the nuclei were mainly inherited from the deformation orientations. Those with low Taylor factors (Cube, Goss and Brass) demonstrated size preference. The post-nucleation growth was affected by the biaxial thermal elastic constraint and surface energy. Due to their opposite effects, the orientations having moderate biaxial moduli and surface energy density (S, Copper, Brass and recrystallization components) survived, resulting in a mixed texture at the completion of recrystallization. The coherent Sigma 3 boundaries between the new components stabilized their growth through consuming the other crystals separated by random high-angle boundaries. The present results provide quantitative information on recrystallization texture and contribute to deepening the understanding of the recrystallization behavior of cold-worked metals.

Research on the recrystallization texture evolution in rolled Ag by quasi-situ EBSD

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Investigation of Microstructure and Recrystallization Texture During Anealing of CSP Cold-Rolled Sheet

Recrystallization Texture Evolution of Cold-Rolled Cu Foils Governed by Microstructural and Sample Geometrical Factors During Heating

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

Investigation of the Microstructure and Rolling Texture Evolution of Cu-45 At.% Ni Alloys During the Recovery Process by Quasi-In Situ Electron Backscatter Diffraction

The Influence of Annealing on the Microstructural and Textural Evolution of Cold-Rolled Er Metal

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

Evolutions of Microstructure and Crystallographic Texture in an Fe-1.2 wt.% Si Alloy After (A)Symmetric Warm Rolling and Annealing

Systematic investigation of the texture evolution of Cu-Ni alloys with different strains

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Effect of Annealing on the Microstructure, Texture and Tensile Deformation Properties of Cu–3 Wt%ag–0.5 Wt%zr Thin Sheets Rolled at Room and Cryogenic Temperature

Understanding the Mechanisms of Texture Evolution of a Fe-24Cr-22Ni-7Mo Super Austenitic Stainless Steel During cold Rolling and Annealing

Oriented Nucleation Causing Unusual Texture Transition During Static Recrystallization Annealing in Cold-Rolled Mg–Zn–Gd Alloys

Quasi-in-situ Observations of Low-Angle Grain Boundaries, Twins and Texture Evolution During Continuous Annealing in a Cold-Rolled Mg-Zn-Gd Alloy

Texture Evolution in Cold-Rolled AZ31 Magnesium Alloy During Electropulsing Treatment

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Quasi-in-situ Observing the Rare Earth Texture Evolution in an Extruded Mg-Zn-Gd Alloy with Bimodal Microstructure

Influence Of Trace Re And Annealing On The Recrystallization Textures Of High Purity Al Anode Foils

Microstructure and Texture Evolutions of Aa1050 Aluminum Alloy Cold Rolled to High Strains

Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy