Abstract:Synergic evolution of microstructure-texture-stored energy in interstitial-free (IF) steels has been investigated to elaborate the effect of dissolved rare-earth (RE) elements on static recrystallization. Grain size, texture fraction and geometrically necessary dislocation distribution of IF steel samples annealed for different times were compared, suggesting that RE elements could postpone recrystallization nucleation but accelerate grain coarsening. The visco-plastic self-consistent model was primarily adopted and verified, then used to calculate the relative activities of different slip systems. It was proved that the compatible deformation of IF steels was very sensitive to dissolved RE elements, in particular the {110} 6 2 slip systems became extremely inactive, leading to an α -fibre textures rich configuration of RE-IF steels. Although both IF steels have the same stored energy sequence of which γ -fibre takes precedence in nucleation followed by α -fibre, the nucleation rates of α / γ -fibres driven by the reduced stored energy slowed down in RE-IF steels. Further nucleation-path analyses revealed that shear bands within γ -fibre mainly sacrificed for grain nucleation of {111} orientation, while α -fibre especially prior grain boundaries therein preferred supplying nucleation sites for {554} grains, which accounting for the competitive growth of γ -fibre textures in RE-IF steels rather than being dominated by a single orientation. After grain growth, the major texture of Normal-IF steels had been transferred to {554} from {111} , while {554} in RE-IF steels still inherited the orientation advantage and grew up rapidly, thus inducing the grain coarsening. As this work offers a significant understanding of RE microalloying effect on static recrystallization, it will provide references for alloy design and industrial application of IF steels.

Characterization of Texture Evolution During Recrystallization by Laser-Induced Transient Thermal Grating Method

Recrystallization Texture Evolution of Cold-Rolled Cu Foils Governed by Microstructural and Sample Geometrical Factors During Heating

The In-Situ Study on the Micro-Structural Characters of if Steel at Early Stage of Recrystallization Using High-Energy X-Ray

High-resolution simulating of grain substructure in cold rolling and its effects on primary recrystallization in annealing of ferritic stainless steel

Effect of recovery annealing prior to recrystallization annealing on the texture evolution of a 3.3% silicon steel

Textural Analysis During Annealing of a Plain Low Carbon Steel Q235 Processed by Different Thermal Mechanical Processing Schedules

Characteristics of Recrystallization Texture Evolution in High Magnetic Field for Interstitial Free (IF) Steel Sheet

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

RECRYSTALLIZATION TEXTURE IN COPPER HEATED BY LASER BEAM AND DISCUSSION ON ITS MECHANISM

Crystal Plasticity-Based Assessment of Constitutive Laws for Microstructure and Rolling Texture Capture in Ferritic Stainless Steel During Cold Rolling

Understanding the Mechanisms of Texture Evolution of a Fe-24Cr-22Ni-7Mo Super Austenitic Stainless Steel During cold Rolling and Annealing

Synergic Evolution of Microstructure-Texture-Stored Energy in Rare-Earth-Added Interstitial-Free Steels Undergoing Static Recrystallization

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Electropulse-induced texture elimination and texture formation in hot-rolled annealed 35CrMo steel

Evolutions of Microstructure and Crystallographic Texture in an Fe-1.2 wt.% Si Alloy After (A)Symmetric Warm Rolling and Annealing

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Investigation of microstructure and texture as related to primary recrystallization of grain-oriented silicon steel

Characterization and Calculation of the Dynamic Recrystallization Texture in Fe-3.0 Wt.% Si Alloy

Effect of the size and dispersion of precipitates formed in hot rolling on recrystallization texture in ferritic stainless steels

On the Relationship between Thermomechanical Processing Parameters and Recrystallization Texture in AA1100 Aluminum Alloy

Recrystallization and texture evolution during hot rolling of copper, studied by a multiscale model combining crystal plasticity and vertex models