Abstract:With the increased use of 2D materials for instrument minimization, research on recrystallization texture of cold-deformed metal foils during annealing becomes attractive, as the recrystallization process is also subjected to external constraints (biaxial thermal strain and surface energy) in addition to the microstructural factors. In this work, the orientation evolution of cold-rolled Cu foils (10 mu m thick) during heating was thoroughly investigated macroscopically by neutron and synchrotron radiation diffraction and microscopically by SEM-EBSD, combined with crystallographic analysis. The results showed that the foils underwent a transition from the cold-rolling texture to a recrystallization texture dominated by two rotated orientations, i.e., RD-rotated Cube and phi(2)-rotated Copper. The transition was screened by both intrinsic microstructural and extrinsic geometrical factors. The orientations of the nuclei were mainly inherited from the deformation orientations. Those with low Taylor factors (Cube, Goss and Brass) demonstrated size preference. The post-nucleation growth was affected by the biaxial thermal elastic constraint and surface energy. Due to their opposite effects, the orientations having moderate biaxial moduli and surface energy density (S, Copper, Brass and recrystallization components) survived, resulting in a mixed texture at the completion of recrystallization. The coherent Sigma 3 boundaries between the new components stabilized their growth through consuming the other crystals separated by random high-angle boundaries. The present results provide quantitative information on recrystallization texture and contribute to deepening the understanding of the recrystallization behavior of cold-worked metals.

Recrystallization and texture evolution during hot rolling of copper, studied by a multiscale model combining crystal plasticity and vertex models

Multi-Scale Modeling of Microstructure Evolution during Multi-Pass Hot-Rolling and Cooling Process

Crystal Plasticity-Based Assessment of Constitutive Laws for Microstructure and Rolling Texture Capture in Ferritic Stainless Steel During Cold Rolling

Recrystallization Texture Evolution of Cold-Rolled Cu Foils Governed by Microstructural and Sample Geometrical Factors During Heating

Modeling Texture Evolution During Rolling Process of AZ31 Magnesium Alloy with Elasto-Plastic Self Consistent Model

High-resolution simulating of grain substructure in cold rolling and its effects on primary recrystallization in annealing of ferritic stainless steel

Combining crystal plasticity and phase field model for predicting texture evolution and the influence of nuclei clustering on recrystallization path kinetics in Ti-alloys

An Integrated Full-Field Model of Concurrent Plastic Deformation and Microstructure Evolution: Application to 3D Simulation of Dynamic Recrystallization in Polycrystalline Copper

A Polycrystal Plasticity Based Discontinuous Dynamic Recrystallization Simulation Method and Its Application to Copper

Characterization of Texture Evolution During Recrystallization by Laser-Induced Transient Thermal Grating Method

Crystal Plasticity Finite Element Simulation of Grain Evolution Behavior in Aluminum Alloy Rolling

Investigation on Grain Size Effect of Rolling Texture in Copper

Modelling of Dynamic Recrystallization in Hot Working

On the Relationship between Thermomechanical Processing Parameters and Recrystallization Texture in AA1100 Aluminum Alloy

Texture evolution and slip mode of a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr dual-phase alloy during cold rolling based on multiscale crystal plasticity finite element model

Modeling of Texture Development during Metal Forming Using Finite Element Visco-Plastic Self-Consistent Model

Evolutions of Microstructure and Crystallographic Texture in an Fe-1.2 wt.% Si Alloy After (A)Symmetric Warm Rolling and Annealing

A Multi-scale Modelling by Coupling Cellular Automata with Finite Element Method and Its Application on Cross-Wedge Rolling

A Polycrystal Plasticity Based Thermo-Mechanical-dynamic Recrystallization Coupled Modeling Method and Its Application to Light Weight Alloys

Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy

Shear localization in polycrystalline metal at high-strain rates with dynamic recrystallization: Crystal plasticity modeling and texture effect