Abstract:The effect of cold rolling and annealing on texture development and mechanical behavior of Zircaloy-4 alloy plates was systematically investigated in the present work. The as-received plates were subjected to cold rolling with thickness reductions of 33% and 66%. Electron back-scatter diffraction and tensile tests were performed to reveal the texture and mechanical properties, respectively. Results showed that a bimodal texture was featured in the as-received plate and the texture was a fiber that spread from <<math>101¯0</math>> to <<math>112¯0</math>>. After cold rolling and annealing, a fiber with a continuous distribution from <<math>101¯0</math>> to <<math>112¯0</math>> and a fiber with a maximum at the <<math>112¯0</math>> position were present in the plates with thickness reductions of 33% and 66%. Besides, the existence of {<math>0001</math>} basal fiber was noticed, indicating more basal poles oriented toward the normal direction. Tensile tests showed that the recrystallized plate with 66% thickness reduction was more ductile and less strong than that with 33% reduction. Meanwhile, tensile properties were sensitive to strain rate, loading direction and thickness reduction. Moreover, the relationship between texture development and yield strength was discussed based on Schmid theory. Calculated results indicated that prismatic <a> slip was the predominant deformation mode and its Schmid factor values under different loading directions contributed to the anisotropy of yield strength. Due to the texture development during cold rolling and annealing, the averaged SF values for prismatic <a> slip changed with the increased thickness reduction, resulting in the variation of yield strength.</a></a>

Investigation of Microstructure and Recrystallization Texture During Anealing of CSP Cold-Rolled Sheet

Microstructure and Texture Evolution of Cold Rolled 1070 Al Alloy During the Subsequent Annealing Treatment

Research on the recrystallization texture evolution in rolled Ag by quasi-situ EBSD

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Microstructure and Texture Evolution in Cold-Rolled and Annealed Oxygen-Free Copper Sheets

Static Recrystallization Behavior and Texture Evolution during Annealing in a Cold Rolling Beta Titanium Alloy Sheet

Evolution of Microstructure and Crystallographic Texture in Severely Cold Rolled High Entropy Equiatomic CoCrFeMnNi Alloy During Annealing

Effect of cross cold rolling and annealing on microstructure and texture in pure nickel

Recrystallization Texture Evolution of Cold-Rolled Cu Foils Governed by Microstructural and Sample Geometrical Factors During Heating

Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing

EFFECT OF ANNEALING TEMPERATURE ON TEXTURE OF COLD-ROLLED NI47TI44NB9 SHEET

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

New insight of texture and microstructure evolution, and the connections between with tensile performance in as-annealed Al-Cu-Mg-Zr sheet

The Influence of Annealing on the Microstructural and Textural Evolution of Cold-Rolled Er Metal

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

Revealing the inhomogeneous nature of microstructure and texture evolution in the cold-rolled CoCrFeMnNi alloy during static recrystallization

Rolling and Annealing Textures of SiCw/Al Composite

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

STUDIES ON RECRYSTALLIZATION TEXTURES AND GRAIN BOUNDARY CHARACTER DISTRIBUTION IN LY12 ALUMINUM ALLOY

Evolutions of Microstructure and Crystallographic Texture in an Fe-1.2 wt.% Si Alloy After (A)Symmetric Warm Rolling and Annealing

Effect of Annealing Temperature on Texture of Cold-Rolled IF Steel Rolled from Strip Hot-Rolled in Ferrite Region