Abstract:The effect of cold rolling and annealing on texture development and mechanical behavior of Zircaloy-4 alloy plates was systematically investigated in the present work. The as-received plates were subjected to cold rolling with thickness reductions of 33% and 66%. Electron back-scatter diffraction and tensile tests were performed to reveal the texture and mechanical properties, respectively. Results showed that a bimodal texture was featured in the as-received plate and the texture was a fiber that spread from <<math>101¯0</math>> to <<math>112¯0</math>>. After cold rolling and annealing, a fiber with a continuous distribution from <<math>101¯0</math>> to <<math>112¯0</math>> and a fiber with a maximum at the <<math>112¯0</math>> position were present in the plates with thickness reductions of 33% and 66%. Besides, the existence of {<math>0001</math>} basal fiber was noticed, indicating more basal poles oriented toward the normal direction. Tensile tests showed that the recrystallized plate with 66% thickness reduction was more ductile and less strong than that with 33% reduction. Meanwhile, tensile properties were sensitive to strain rate, loading direction and thickness reduction. Moreover, the relationship between texture development and yield strength was discussed based on Schmid theory. Calculated results indicated that prismatic <a> slip was the predominant deformation mode and its Schmid factor values under different loading directions contributed to the anisotropy of yield strength. Due to the texture development during cold rolling and annealing, the averaged SF values for prismatic <a> slip changed with the increased thickness reduction, resulting in the variation of yield strength.</a></a>

Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Effect of uniaxial loading direction on mechanical responses and texture evolution in cold pilgered Zircaloy-4 tube: Experiments and modeling

Understanding the mechanisms of texture evolution in an Mg-2Zn-1Ca alloy during cold rolling and annealing

Revealing the evolution mechanisms of microstructure, texture and mechanical behavior in Zr702 alloy plates fabricated by accumulative roll bonding

New insight of texture and microstructure evolution, and the connections between with tensile performance in as-annealed Al-Cu-Mg-Zr sheet

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Reduction per pass effect on texture traits and mechanical anisotropy of Mg–Al–Zn–Mn–Ca alloy subjected to unidirectional and cross rolling

Effect of cryogenic rolling on the microstructure and texture of CuCrZr alloy

Microstructure, texture evolution and mechanical anisotropy of Mg-Gd-Y-Zn-Zr alloy sheets produced by unidirectional and cross rolling

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

The Dependence of Final Microstructure, Texture Evolution and Mechanical Properties of Al–Mg–Si–Cu Alloy Sheets on the Intermediate Annealing

Effect of annealing temperature on anisotropy of mechanical properties in powder metallurgy FeCoCrNiN0.07 high-entropy alloy sheets

Microstructure and Texture Evolution in Cold-Rolled and Annealed Oxygen-Free Copper Sheets

Tailoring the texture and mechanical properties of 3% Y 2 O 3p /ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing

Deformation mechanism, orientation evolution and mechanical properties of annealed cross-rolled Mg-Zn-Zr-Y-Gd sheet during tension

Tensile fracture behavior and texture evolution of a hot-rolled W-Y<sub>2</sub>(Zr)O<sub>3</sub> alloy

Texture evolution and slip mode of a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr dual-phase alloy during cold rolling based on multiscale crystal plasticity finite element model

Tailoring the formability and planar anisotropy of Al-Mg-Si-Cu-Zn alloys via cross hot rolling and two-stage cold rolling

Effect of cold Pilger rolling followed by annealing on fatigue crack initiation in Zircaloy-4 alloy cladding tube

Effect of annealing treatment on texture evolution, microstructure and mechanical properties of an extruded Mg-Gd-Zn-Zr alloy