Abstract:UV-curable coatings have been widely used because of their environmental friendliness and low emission of volatile organic compounds (VOCs). However, the fast curing-speed of UV-curable coatings will lead to internal structural defects, which greatly restricts its application and development. In this paper, we designed and prepared a UV-curable self-healing transparent polyurethane acrylate coating based on disulfide bonds and hardened the coating by modified nano-silica. The coating shows 93 % scratch repair efficiency under UV light at 50 °C, and the coating has high hardness (4H). In addition, the coating exhibits good transparency (85 % transmittance in the visible region), which means that the coating can meet the requirements of the applications of transparency protective coating. The defect that blending inorganic particles will hinder the movement of molecular chain was overcome owing to the modified nano-silica (SiO2-KH570) is not simply mixed with the other components but grafted onto the chain. Therefore, the addition of SiO2-KH570 not only harden the coating, but also can reduce the glass transition temperature (Tg) of the coating that is helpful for self-healing of the coating. What's more, it is proved that the introduction of disulfide reversible bonds is helpful to eliminate internal stress of UV-curing materials by preheating process, in which the mechanical properties of the coating with disulfide bonds significantly improved (increased by at most 209 %). The present study broadens the application of UV-curable coatings, and is expected to address the problem of internal stress defects in UV-curable materials.

Fabrication of UV-curable Silicone Coating with High Transmittance and Laser-Induced Damage Threshold for High-Power Laser System

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Antireflective Coatings Used for High-Power Co2-Laser

Fabrication of UV-Curable Polysiloxane Coating with Tunable Refractive Index Based on Controllable Hydrolysis

Antireflective laser coating with improved mechanical property and organic-contaminant resistance for high-power laser application

Control of the damage threshold of Si via a SiO2 coating upon irradiation with Mid-IR femtosecond laser pulses

Effect of the Dynamic Porous Structure Generation in Laser Irradiated Multi-Functional Coatings

Fabrication and performance of UV cured transparent silicone modified polyurethane–acrylate coatings with high hardness, good thermal stability and adhesion

Preparation Of The Oxyfluoride Glass With High 3 Omega Laser Induced Damage Threshold

Advanced Mitigation Process (AMP) for Improving Laser Damage Threshold of Fused Silica Optics

Study on the Absorption Characteristics and Laser Damage Properties of Fused Silica Optics under Flexible Polishing and Shallow DCE Process

Fabrication of 808 Nm Al-containing Semiconductor Laser Diode High Damage Threshold Facet Coating

Ablation Behavior of Plasma-Sprayed La1-xSrxTiO3+δ Coating Irradiated by High-Intensity Continuous Laser

Organic-inorganic composites for novel optical transformation induced by high-energy laser ablation

Design and preparation of composite coatings with increased reflectivity under high-energy continuous wave laser ablation

Toward improving the reflectivity of ablative heat-insulating coating under high-energy laser irradiation

Combination of scanning ion beam etching and dynamic chemical etching for improving laser damage resistance of fused silica optics

UV-curable self-healing, high hardness and transparent polyurethane acrylate coating based on dynamic bonds and modified nano-silica

Achieving Refined Overlay Microstructure of a Zn-55Al-3Mg-1.5Si Coating Using High Power Diode Laser (HPDL) Surface Treatment

Laser field manipulation and laser damage resistance property of nanotextures on fused silica optics

Material migration and damage characteristics of fused silica optical surface treated by CO 2 laser/short – pulse ultraviolet laser