Abstract:Atomic layer deposition (ALD) is an emerging coating deposition technique filled with potential that is expected to deposit coatings with high laser-induced damage threshold (LIDT). As lasers play an important role in space exploration which are gradually moving to higher orbits and longer lifetimes, a higher demand for space laser coatings has been raising. At the current state of the art, the reliability of ALD-deposited laser coatings for space applications is unclear. This work presents investigations on the stability of three ALD-deposited oxide coatings under space proton and UV radiation at values typical for space environment. Changes in the coatings containing low and high amounts of impurities under space radiation were analyzed through optical parse and composition analysis respectively. Both SiO 2 and Al 2 O 3 coatings with few impurities generated color centers after irradiation, which resulted in increased absorption loss and reduced transmittance and optical band gap, and increased probability of damage under laser irradiation. However, the changes in the ZrO 2 coating were surprising, when the ZrO 2 coating with a large amount of impurities was exposed to radiation, the impurity atoms bound to Zr were displaced first, and the released Zr combined with the oxygen vacancies in the coating, which reduced the number of defects, reduced the absorption loss of the coating, and led to a higher transmittance and an increased optical band-gap. This work provided a novel insight on the impact of the impurities on the stability of the ALD-manufactured oxide coatings against laser-induced damage in effect with space proton and UV radiation. Additionally, we show that high initial LIDT in ALD-prepared oxides may be compromised by the space radiation, while fine tuning of the impurities may result a mitigation approach leading to enhanced laser coatings for space applications.

Ablation Behavior of Plasma-Sprayed La1-xSrxTiO3+δ Coating Irradiated by High-Intensity Continuous Laser

Effect of the Dynamic Porous Structure Generation in Laser Irradiated Multi-Functional Coatings

Toward improving the reflectivity of ablative heat-insulating coating under high-energy laser irradiation

Microstructural Strengthening and Plastic Degradation of Ti–6Al–4V Induced by Laser Ablation

Effect of La2o3 on Resistance to High-Temperature Oxidation of Laser Clad Ferrite-Based Alloy Coatings

Ablation behavior of Ta, TaC and Ta/TaC coatings on graphite under high-energy laser irradiation

Design and preparation of resin matrix composite coating with good ablation resistance performance under high-energy laser irradiation

Laser ablation and LIPSS formation at static and dynamic multi-pulse regime on protective Al2O3/TiAlN coating

Design and preparation of composite coatings with increased reflectivity under high-energy continuous wave laser ablation

Comprehensive Study of the Film Surface Temperature and Plasma Thermokinetics During La1.85Sr0.15CuO4 Deposition by Laser Ablation

Effect of oxide film on corrosion behavior of NiTi coating prepared by extreme high-speed laser cladding

Laser–target interaction during high-power pulsed laser deposition of superconducting thin films

Study on the mechanism of ultra-high temperature ablation of ZrB2–SiC–TaSi2 coatings by low-pressure plasma spraying on the C/C composites

Effect of laser remelting on the tribological performance of thermal barrier coatings

Preparation and Solid Particle Erosion Behaviors of Plasma-Sprayed and Laser-Remelted ZrO2-7wt.%Y2O3 Thermal Barrier Coatings

Influence of Preheating on the Microstructure Evolution of Laser Re-Melting Thermal Barrier Coatings/Ni-Based Single Crystal Superalloy Multilayer System

Ablation behavior of sharp leading edge parts made of rare earth La-compound modified ZrB2 coated C/C composites

Influence of Lah2 on Oxidation Characteristics and Irradiation Melting Characteristics of A Tungsten Coating Fabricated by Atmospheric Plasma Spraying

Microstructure and anti-ablation of laser cladding Ti-Zr-B-C coating on TC11 titanium alloy

Effect of residual impurities on the behavior and laser-induced damage of oxide coatings exposed to deep space radiation