Abstract:We demonstrated a simple and effective approach to fabricate dense and high aspect ratio sub-50 nm pillars based on phase separation of a polymer blend composed of a cross-linkable polysiloxane and polystyrene (PS). In order to obtain the phase-separated domains with nanoscale size, a liquid prepolymer of cross-linkable polysiloxane was employed as one moiety for increasing the miscibility of the polymer blend. After phase separation via spin-coating, the dispersed domains of liquid polysiloxane with sub-50 nm size could be solidified by UV exposure. The solidified polysiloxane domains took the role of etching mask for formation of high aspect ratio nanopillars by O-2 reactive ion etching (RIE). The aspect ratio of the nanopillars could be further amplified by introduction of a polymer transfer layer underneath the polymer blend film. The effects of spin speeds, the weight ratio of the polysiloxane/PS blend, and the concentration of polysiloxane/PS blend in toluene on the characters of the nanopillars were investigated. The gold-coated nanopillar arrays exhibited a high Raman scattering enhancement factor in the range of 10(8)-10(9) with high uniformity across over the wafer scale sample. A superhydrophobic surface could be realized by coating a self-assembled monolayers (SAM) of fluoroalkyltrichlorosilane on the nanopillar arrays. Sub-50 nm silicon nanowires (SiNWs) with high aspect ratio of about 1000 were achieved by using the nanopillars as etching mask through a metal-assisted chemical etching process. They showed an ultralow reflectance of approximately 0.1% for wavelengths ranging from 200 to 800 nm.

Fabrication and Characterization of SiO2/Si Heterogeneous Nanopillar Arrays

Fabrication of Submicrometer Inp Pillars by Colloidal Lithography and Dry Etching

Optical Device Based on a Nanopillar Array by the Pattern Transfer of an Anodic Aluminum Oxide Membrane

Multiple-Patterning Nanosphere Lithography for Fabricating Periodic Three-Dimensional Hierarchical Nanostructures.

Fabrication and Characterization of Slanted Nanopillars Array

Wafer Scale Fabrication of Dense and High Aspect Ratio Sub-50 Nm Nanopillars from Phase Separation of Cross-Linkable Polysiloxane/Polystyrene Blend

Fabrication of Nanopillars Based on Silicon Oxide Nanopatterns Synthesized in Oxygen Plasma Removal of Photoresist

Fabrication of Silicon Hierarchical Nanopillar Arrays Based on Nanosphere Lithography

A novel fabrication technique for high-aspect-ratio nanopillar arrays for SERS application

Fabrication of large-scale periodic silicon nanopillar arrays for 2D nanomold using modified nanosphere lithography☆

Cell spreading behaviors on hybrid nanopillar and nanohole arrays

High aspect ratio arrays of Si nano-pillars using displacement Talbot lithography and gas-MacEtch

Preparation of Silicon Nanopillars Array Using Gold Nanoparticles As Etching Mask

Heterogeneous Optoelectronic Characteristics of Si Micropillar Arrays Fabricated by Metal-Assisted Chemical Etching

Microoptics: Multifurcate Assembly of Slanted Micropillars Fabricated by Superposition of Optical Vortices and Application in High-Efficiency Trapping Microparticles (Adv. Funct. Mater. 45/2017)

Size and Morphology Control of Highly-Ordered Nano-Silicon Pillar Fabricated by Direct Nanosphere Lithography

Fabrication of ordered arrays of silicon nanopillars in silicon-on-insulator wafers

RIE of SiO_2 Nanoparticles and Its Application in Preparation of Silicon Nanopillar Array

Tailored Nano-Pillar Structures on Surfaces: Facile Formation and Multifunctional Properties

Stacked SiO2/Si Nanonail Array Fabricated by Spacer Technology for Biomedical Applications

Gold Nanopillar Arrays As Biosensors Fabricated by Electron Beam Lithography Combined with Electroplating