Abstract:Highly conductive domain walls in insulating ferroelectric LiNbO3 (LNO) single-crystal thin films with atomic smoothness are attractive for use in high-density integration of the ferroelectric domain wall random access memory (DWRAM) because of their excellent reliability and high read currents. However, downscaling of the memory size to the nanoscale could cause poor polarization retention. Understanding the size-dependent electrical performance of a memory cell is therefore crucial. In this work, highly insulating X-cut LNO thin films were bonded to SiO2/Si wafers and lateral mesa-like cells were fabricated on the film surfaces, where contact occurred with two-sided electrodes along the polar z-axis. Under application of an in-plane electric field above a coercive field (Ec), the domain within each memory cell was switched to be antiparallel to the unswitched referencing domain at the bottom; this resulted in the formation of a conducting domain wall, which enables the nondestructive readout strategy of the DWRAM. The cell, which has a lateral length (l) above a critical size (l0) of 105 nm, is found to be a mixture of two phases across the cell area. The inner area of the cell suffers from poor polarization retention because Ec = 150 kV/cm, as demonstrated by in-plane piezoresponse force microscopy imaging. In comparison, the outer periphery domains, which have lengths of 70 nm (∼l0/2), show good retention but require a much higher Ec of 785 kV/cm. The relevant physics is discussed as phase reconstruction occurs after release of the in-plane compressive strain near the outer regions; the results show good agreement with those of one-dimensional thermodynamic calculations and phase-field simulations. The measured current–voltage curves demonstrated a sudden enhancement of the wall current across the cell when l < l0, thus implying higher readout wall currents and better retention for the DWRAM at higher storage densities.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22969?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22969</a>.Phase-field simulation (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22969/suppl_file/am0c22969_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Thickness Effect of Nickel Oxide Thin Films on Associated Solution-Processed Write-Once-read-many-times Memory Devices

Flexible Write-Once–Read-Many-Times Memory Device Based on a Nickel Oxide Thin Film

Enhancing nonvolatile write-once-read-many-times memory effects with SiO 2 nanoparticles sandwiched by poly(N-vinylcarbazole) layers

Write-once-read-many-times memory device based on Pt/BiFeO3/LaNiO3 heterostructures

Low-cost Fabrication and Polar-Dependent Switching Uniformity of Memory Devices Using Alumina Interfacial Layer and Ag Nanoparticle Monolayer

In-Plane Ferroelectric Domain Wall Memory with Embedded Electrodes on LiNbO3 Thin Films.

Electrical Characteristics and Carrier Transport Mechanisms of Write-Once-read-many-times Memory Elements Based on Graphene Oxide Diodes

A Two-Terminal Write-Once-read-many-times-memory Device Based on an Aluminum Nitride Thin Film Containing Al Nanocrystals.

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Tunable Resistive Switching Behaviors and Mechanism of the W/ZnO/ITO Memory Cell

Effects of Interface Reaction on the Performance of Alox/Wox Bilayer Resistive Switching Memory

Size-Controlled Polarization Retention and Wall Current in Lithium Niobate Single-Crystal Memories

Effects of interfacial oxide layer formed by annealing process on WORM characteristics of Ag/CuxO/SiOx/n+–Si devices

In Situ Observation of Nickel As an Oxidizable Electrode Material for the Solid-Electrolyte-Based Resistive Random Access Memory

<formula formulatype="inline"><tex Notation="TeX">$\hbox{ZrO}_{2}$</tex></formula>-Based Memory Cell With a Self-Rectifying Effect for Crossbar WORM Memory Application

Polyfluorene-based push-pull type functional materials for write-once-read-many-times memory devices

Self-Formed Conductive Nanofilaments in (bi, Mn)O-X for Ultralow-Power Memory Devices

Design of a Two-Layer Structure to Significantly Improve the Performance of Zinc Oxide Resistive Memory

Magnetron Sputtered Ni-Rich Nickel Oxide Nano-Films For Resistive Switching Memory Applications

Flexible Nanoscale Memory Device Based on Resistive Switching in Nickel Oxide Thin Film

Endurance improvement technology with nitrogen implanted in the interface of WSiOx resistance switching device