Abstract:We reported a low-temperature solution-processed method for the fabrication of AlOx thin films in the memory device. The detailed study is carried out to figure out the effect of varying annealing temperatures (150, 200, 250, 300, and 350 degrees C) on resistive switching characteristics of solution-processed aluminum oxide dielectric. The dielectric properties of AlOx films under different annealing temperatures were evaluated by atomic force microscopy (AFM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) firstly. Then the AlOx films were used as the switching dielectric layer for a variety of low-temperature solution-processed oxide resistive random access memory (RRAM) devices. It was found that forming voltage increased with increasing annealing temperature and forming free behavior could be achieved by 200 degrees C sample. No repeatable resistance switching characteristics were observed in the devices with minimum (150 degrees C) and maximum (350 degrees C) annealing temperatures. Compared with the ALD-derived AlOx based RRAM devices in previous study, enhanced performance like small forming voltage, large resistance ratio (<180) and narrow resistance and voltage distribution was achieved by the solution-processed AlOx based ones at the optimized low annealing temperatures of 200 to 250 degrees C, which would be applied in the bionic circuit simulated by synapses and neural networks. All three samples (200, 250, and 300 degrees C) obtained switching endurance up to 300 cycles and data retention over 10(4) s. Furthermore, the solution based fabrication method also has the potential in the flexible memory application due to the merit of the low-temperature process.

Effects of Interface Reaction on the Performance of Alox/Wox Bilayer Resistive Switching Memory

Study of Conduction and Switching Mechanisms in Al/Alox/Wox/W Resistive Switching Memory for Multilevel Applications

The W Oxidation Time Effect on Resistive Switching Speed in AlOx/WOx-based RRAM

Asymmetric Resistive Switching Processes in W:AlO X /WO Y Bilayer Devices

Different Interface Role in Cuox Based Rram

Impact of interfacial engineering on MgO-based resistive switching devices for low-power applications

Study of redox reactions in resistive switching processes of AlO x /WO y based bilayer RRAM

Annealed AlOx Film with Enhanced Performance for Bipolar Resistive Switching Memory

Performance Enhancement of Nonvolatile Resistive Switching Memory device Made from WO<sub>X</sub>/ZnO Bilayer Structure

Thermal Stability of Resistive Switching Effect in ZnO/BiFeO3 Bilayer Structure

Variability Improvement of TiOx/Al2O3 Bilayer Nonvolatile Resistive Switching Devices by Interfacial Band Engineering with an Ultrathin Al2O3 Dielectric Material

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Silicon Introduced Effect On Resistive Switching Characteristics Of Wox Thin Films

Mechanism for an enhanced resistive switching effect of bilayer NiOx/TiO2 for resistive random access memory

Impact of tungsten oxidation conditions on the performance of Al2O3/WOx-based CBRAM devices

Migration of Interfacial Oxygen Ions Modulated Resistive Switching in Oxide-Based Memory Devices

Endurance Enhancement Of Cu-Oxide Based Resistive Switching Memory With Al Top Electrode

Effect of electrode area on resistive switching behavior in translucent solution-processed AlOx based memory device

Enhanced Short-Term Memory Plasticity of WOx-Based Memristors by Inserting AlOx Thin Layer

Effects of interfacial oxide layer formed by annealing process on WORM characteristics of Ag/CuxO/SiOx/n+–Si devices

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method