Abstract:Chemical solution deposition is a promising technology to fabricate YBCO superconducting thin films due to its low-cost advantage. As found in our previous study, the addition of lead acetate in precursor solution could enhance the critical current density of YBCO films, since the deteriorating a/b-axis orientated grains could be suppressed. In this study, the precursor solutions with lead acetate weight percentages of 0%, 1%, 2% and 3% were prepared. The molar concentration of all metal ions was 2.0 mol/L for all solutions. Crystallization temperatures of 720 degrees C, 740 degrees C, 760 degrees C, 780 degrees C, 800 degrees C and 820 degrees C were used in the heat treatment. The thickness of the finally obtained YBCO films was about 400 nm. It was found that 1% of lead acetate addition was favorable to achieve high critical current at 77 K in self-field, and the critical current generally increased along with the crystallization temperature. The cross-sectional microstructure of YBCO thin films fabricated by using lead acetate addition was denser than that of the counterpart samples. In situ measurement of the film's resistance during the heat treatment was carried out to analyze the growth and nucleation processes of YBCO thin film deposition. The mechanism of lead acetate addition for the a/b-axis oriented grain suppression reported in our previous study was investigated.

Influence of Dip-Coating Temperature Upon Film Thickness in Chemical Solution Deposition

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Investigations on the Lead Acetate Addition in Precursor Solutions for YBCO Superconducting Film Deposition

Fabrication and Analysis of Tri-layer YBa2Cu3O7−δ Thick Films by Low-Fluorine MOD Method

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

Study on PEG Assisted TFA-MOD Method for Rapid Fabrication of YBa2Cu3O7−δ Thin Films: Influence of PEG Additive Amount in Precursor Solutions

Thick REBaCuO Superconducting Films Through Single-Coating of Low-Fluorine Metallorganic Solution

Preparation of Yba2cu3o7-X Superconducting Thin-Films over Large Area Substrates

Thick $\Hbox{yba}_{2}\hbox{cu}_{3}\hbox{o}_{7-\Delta}$ Superconducting Films by Low-Fluorine Metallorganic Solution Deposition

Low-Vacuum Pyrolysis of YBCO Films by Using Fluorine-Free Metal Organic Chemical Deposition

Texture Development of Dip-Coated Bi-2223 Thick Films on Ag Substrate

Effective surface modification by chemical solution deposition for flexible metal substrates

Enhancing superconductivity of ultrathin YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-δ</sub> films by capping non-superconducting oxides*

STUDY OF THE PREPARATION OF HIGH Tc SUPERCONDUCTING YBCO THIN FILMS BY A PLASMA-ASSISTED MOCVD PROCESS

A Rapid Process of YBa2Cu3O7−δthin Film Fabrication Using Trifluoroacetate Metal–organic Deposition with Polyethylene Glycol Additive

Improvement of Bi-Layered YBCO Superconducting Films by Using Ag and Au Interlayers

Controlled-Growth of Yba2cu3o7-Delta Film Using Modified Low-Fluorine Chemical Solution Deposition

HIGH Tc SUPERCONDUCTING THIN FILMS BY CHEMICAL SPRAY DEPOSITION

Surface Morphology and Profile Analysis for Five-Layer YBa 2 Cu 3 O 7− Δ Thick Films Prepared by Low-Fluorine Metallorganic Deposition

Edge cracking behavior of Y2O3 coatings by the solution deposition planarization method