Abstract:Aluminum nitride (AlN)-on-Si MEMS resonators operating in Lamb wave modes have found wide applications for physical sensing and frequency generation. Due to the inherent layered structure, the strain distributions of Lamb wave modes become distorted in certain cases, which could benefit its potential application for surface physical sensing. This paper investigates the strain distributions of fundamental and first-order Lamb wave modes (i.e. S0, A0, S1, A1 modes) associated with their piezoelectric transductions in a group of AlN-on-Si resonators. The devices were designed with notable change in normalized wavenumber resulting in resonant frequencies ranging from 50 to 500 MHz. It is shown that the strain distributions of four Lamb wave modes vary quite differently as normalized wavenumber changes. In particular, it is found that the strain energy of A1-mode resonator tends to concentrate to the top surface of acoustic cavity as the normalized wavenumber increases, while that of S0-mode device becomes more confined in the central area. By electrically characterizing the designed devices in four Lamb wave modes, the effects of vibration mode distortion on resonant frequency and piezoelectric transduction were analyzed and compared. It is shown that designing A1-mode AlN-on-Si resonator with identical acoustic wavelength and device thickness benefits its surface strain concentration as well as piezoelectric transduction, which are both demanded for surface physical sensing. We herein demonstrate a 500-MHz A1-mode AlN-on-Si resonator with decent unloaded quality factor (Qu = 1500) and low motional resistance (Rm = 33 Ω) at atmospheric pressure.

Wafer-Level Vacuum-Packaged High-Performance AlN-on-SOI Piezoelectric Resonator for Sub-100-MHz Oscillator Applications

High Q Low Inpedance Wlcsp Resonator for Sub-100 Mhz Programmable Oscillator Application

Dielectric Resonators with High $Q$-Factor for Tunable Low Phase Noise Oscillators

Substrate Integrated High-Q Dielectric Resonators for Low Phase Noise Oscillator

Broad tuning low noise ku band dielectric resonators oscillators

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

1.05-GHz CMOS oscillator based on lateral- field-excited piezoelectric AlN contour- mode MEMS resonators

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

A Temperature-Stable and Low Impedance Piezoelectric MEMS Resonator for Drop-in Replacement of Quartz Crystals

A High-Performance Bulk Mode Single Crystal Silicon Microresonator Based On A Cavity-Soi Wafer

A Lame Mode Resonator Based on Aluminum Nitride on Silicon Platform

A ScAlN-based piezoelectric breathing mode dual-ring resonator with high temperature stability

A Fast-Startup Self-Sustained Thermal-Piezoresistive Oscillaror with >106 Effective Quality Factor in the Air

A Low Phase Jitter MEMS Oscillator with Centrally-Anchored Piezoelectric Resonator for Wide Temperature Range Real Time Clock Applications

Investigation Of Nano Sic Resonator

Wafer Level Vacuum Packaged Resonator with In-Situ Au-Al Eutectic Re-Distribution Layer

Low- Phase Noise Oscillator Utilising High- Q Active Resonator Based on Substrate Integrated Waveguide Technique

Microfabricated Aluminum Nitride MEMS Resonator.

Investigation on Quasi Lamb Wave Modes in AlN-on-Si MEMS Resonators

High-Performance SAW Resonators Based on Single-crystalline a-Plane AlN Thin Films on Sapphire Substrates

Design of Ku-band Low Phase Noise Oscillator Utilizing High-Q Air-filled Substrate Integrated Waveguide Resonator