Abstract:Aluminum nitride (AlN)-on-Si MEMS resonators operating in Lamb wave modes have found wide applications for physical sensing and frequency generation. Due to the inherent layered structure, the strain distributions of Lamb wave modes become distorted in certain cases, which could benefit its potential application for surface physical sensing. This paper investigates the strain distributions of fundamental and first-order Lamb wave modes (i.e. S0, A0, S1, A1 modes) associated with their piezoelectric transductions in a group of AlN-on-Si resonators. The devices were designed with notable change in normalized wavenumber resulting in resonant frequencies ranging from 50 to 500 MHz. It is shown that the strain distributions of four Lamb wave modes vary quite differently as normalized wavenumber changes. In particular, it is found that the strain energy of A1-mode resonator tends to concentrate to the top surface of acoustic cavity as the normalized wavenumber increases, while that of S0-mode device becomes more confined in the central area. By electrically characterizing the designed devices in four Lamb wave modes, the effects of vibration mode distortion on resonant frequency and piezoelectric transduction were analyzed and compared. It is shown that designing A1-mode AlN-on-Si resonator with identical acoustic wavelength and device thickness benefits its surface strain concentration as well as piezoelectric transduction, which are both demanded for surface physical sensing. We herein demonstrate a 500-MHz A1-mode AlN-on-Si resonator with decent unloaded quality factor (Qu = 1500) and low motional resistance (Rm = 33 Ω) at atmospheric pressure.

High Q Low Inpedance Wlcsp Resonator for Sub-100 Mhz Programmable Oscillator Application

Dielectric Resonators with High $Q$-Factor for Tunable Low Phase Noise Oscillators

Substrate Integrated High-Q Dielectric Resonators for Low Phase Noise Oscillator

Broad tuning low noise ku band dielectric resonators oscillators

A Low Phase Noise VCO with Placement Reordered Cores and High-Q Bond Wire Array Inductors

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

1.05-GHz CMOS oscillator based on lateral- field-excited piezoelectric AlN contour- mode MEMS resonators

Investigation Of Nano Sic Resonator

A ScAlN-based piezoelectric breathing mode dual-ring resonator with high temperature stability

A Low Phase Jitter MEMS Oscillator with Centrally-Anchored Piezoelectric Resonator for Wide Temperature Range Real Time Clock Applications

A low phase noise oscillator using SIW combline resonator

Design and Fabrication of Low Phase Noise Oscillator Using $Q$ Enhancement of the SISL Cavity Resonator

A 47μW 204MHz AlN Contour-Mode MEMS based tunable oscillator in 65nm CMOS

Low-phase-noise surface acoustic wave oscillator using phononic crystal bandgap-edge mode

422 Million intrinsic quality factor planar integrated all-waveguide resonator with sub-MHz linewidth

Compact inductor-capacitor resonators at sub-gigahertz frequencies

High-Performance SAW Resonators Based on Single-crystalline a-Plane AlN Thin Films on Sapphire Substrates

Investigation on Quasi Lamb Wave Modes in AlN-on-Si MEMS Resonators

AlN/6H-SiC SAW resonator for high temperature wireless SAW sensor

Low temperature coefficient of frequency AlN Lamb wave resonator using groove structure between interdigital transducers