Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

Broad tuning low noise ku band dielectric resonators oscillators

Dielectric Resonators with High $Q$-Factor for Tunable Low Phase Noise Oscillators

Substrate Integrated High-Q Dielectric Resonators for Low Phase Noise Oscillator

A K-Band CMOS Standing Wave Oscillator Using Digital-Controlled Artificial Dielectric Differential Transmission Lines

Substrate-Suspended Air Cavity Resonator and Its Application in Low Phase Noise Oscillator

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

A low phase noise oscillator using SIW combline resonator

Design and Fabrication of Low Phase Noise Oscillator Using $Q$ Enhancement of the SISL Cavity Resonator

A LOW POWER, LOW PHASE NOISE FBAR OSCILLATOR

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

A Tunable Broadband Photonic RF Phase Shifter Based on a Silicon Microring Resonator

Low-phase-noise surface acoustic wave oscillator using phononic crystal bandgap-edge mode

422 Million intrinsic quality factor planar integrated all-waveguide resonator with sub-MHz linewidth

Low phase noise microwave oscillator based on gain driven polariton

C-Band Lithium Niobate on Silicon Carbide SAW Resonator With Figure-of-Merit of 124 at 6.5 GHz

Low Phase Noise X-Band Optoelectronic Oscillator Utilizing a Phase Locked Loop

Widely Tunable Parity-Time-Symmetric Optoelectronic Oscillator Based on a Silicon Microdisk Resonator

A 96-Ghz Oscillator by High-Q Differential Transmission Line Loaded with Complementary Split-Ring Resonator in 65-Nm CMOS

High- Integrated CMOS-MEMS Resonators With Deep-Submicrometer Gaps and Quasi-Linear Frequency Tuning

PM noise of a 40 GHz air-dielectric cavity oscillator

A 76 GHz Oscillator by High-Q Differential Transmission Line Loaded with Split Ring Resonator in 65-Nm CMOS