Abstract:Bifacial passivated emitter and rear cells (PERC) currently have the highest share in the photovoltaic market. However, heterojunction (HJT) and tunnel oxide passivated contact (TOPCon) solar cells are expected to gain significant market share shortly. Despite technological advancements, concerns about the reliability of HJT and TOPCon technologies when deployed in the field still need to be addressed. This work investigates the impact of sodium chloride (NaCl) on damp-heat-induced degradation in bifacial HJT, PERC, and TOPCon solar cells by exposing the solar cells to NaCl before damp heat (DH) testing. It is found that among all investigated cell technologies, TOPCon solar cells degrade the most with maximum power (P max ) loss of up to ∼75% rel , followed by HJT (P max drops ∼50% rel ), and PERC cells (P max drops only ∼10% rel ) after 20 h of DH testing, mainly attributed to an increase in R s on the front side of TOPCon cells, both sides of HJT cells and the rear side of PERC cells. The front of the PERC and the rear of the TOPCon solar cell are found to be stable. The rise in R s is attributed to the corrosion of the metal contact, which is caused by a high amount of Na + and Cl − ions penetrating the metal contact. This corrosion leads to increased porosity, detachment of the contact from the silicon interface, and increased recombination loss in some cases. These results are crucial for all cell technologies as they highlight the potential failures that could occur in the field. Na + and/or Cl − ions are common contaminants present in solar glass, human fingerprints, soldering flux, rainwater, soil/dust, and seawater. During field operation, these ions have the potential to penetrate and directly interact with solar cells. In our view, the preferred solution is for the solar cells to be corrosion-resistant, which can be rapidly assessed using the method presented in this work.

Corrosion Behavior of Crystalline Silicon Solar Cells

Analysis of the Degradation of Monocrystalline Silicon Photovoltaic Modules After Long-Term Exposure for 18 Years in a Hot–Humid Climate in China

Potential‐induced electrochemical corrosion in crystalline silicon solar cells

Effect of Glass Phase on Solder Joint Reliability in Crystalline Silicon Photovoltaic Modules

Study on Tarnishing Mechanism of Grid Lines on Crystalline Silicon Solar Cells

A Comparison of Cathodoluminescence and Photoluminescence of Porous Silicon and the Influence of Aging and Electron Irradiation of These Properties

The Electrochemical Reactions in Crystalline Silicon Solar Modules

Analysis of the Electrochemical Reactions and Ions Migration for Crystalline Silicon Solar Module under High System Voltage

Deterioration of Silver Alloy Electrode Caused by Photocatalytic Reaction for Crystalline Silicon Solar Cells

Scanning Electrochemical Microscopy Reveals That Model Silicon Anodes Demonstrate Global Solid Electrolyte Interphase Passivation Degradation during Calendar Aging

Corrosion Mechanism and Surface Passivation Strategies of Polycrystalline Silicon Electrodes

Correlation between the metallization corrosion and acetic acid in crystalline silicon photovoltaic module

Effect of Glass Frit Composition on Reliability of Silver Paste Metallization in Crystalline Silicon Solar Cells

Study of the correlation between hydrogenated amorphous silicon microstructure and crystalline silicon surface passivation in heterojunction solar cells

Performance Degradation of Crystalline Silicon Solar Module in Various Ultraviolet Radiation Area

Investigation of soldering for crystalline silicon solar cells

Long-term stability study of the passivation quality of polysilicon-based passivation layers for silicon solar cells

Impact of Surface Treatments on the Passivation Effect for N-Type Crystalline Silicon in Heterojunction Solar Cells

Accelerated damp-heat testing at the cell-level of bifacial silicon HJT, PERC and TOPCon solar cells using sodium chloride

The Materials Characteristic and the Efficiency Degradation of Solar Cells from Solar Grade Silicon from a Metallurgical Process Route

Passivating Contacts for Crystalline Silicon Solar Cells: An Overview of the Current Advances and Future Perspectives