Abstract:Bifacial passivated emitter and rear cells (PERC) currently have the highest share in the photovoltaic market. However, heterojunction (HJT) and tunnel oxide passivated contact (TOPCon) solar cells are expected to gain significant market share shortly. Despite technological advancements, concerns about the reliability of HJT and TOPCon technologies when deployed in the field still need to be addressed. This work investigates the impact of sodium chloride (NaCl) on damp-heat-induced degradation in bifacial HJT, PERC, and TOPCon solar cells by exposing the solar cells to NaCl before damp heat (DH) testing. It is found that among all investigated cell technologies, TOPCon solar cells degrade the most with maximum power (P max ) loss of up to ∼75% rel , followed by HJT (P max drops ∼50% rel ), and PERC cells (P max drops only ∼10% rel ) after 20 h of DH testing, mainly attributed to an increase in R s on the front side of TOPCon cells, both sides of HJT cells and the rear side of PERC cells. The front of the PERC and the rear of the TOPCon solar cell are found to be stable. The rise in R s is attributed to the corrosion of the metal contact, which is caused by a high amount of Na + and Cl − ions penetrating the metal contact. This corrosion leads to increased porosity, detachment of the contact from the silicon interface, and increased recombination loss in some cases. These results are crucial for all cell technologies as they highlight the potential failures that could occur in the field. Na + and/or Cl − ions are common contaminants present in solar glass, human fingerprints, soldering flux, rainwater, soil/dust, and seawater. During field operation, these ions have the potential to penetrate and directly interact with solar cells. In our view, the preferred solution is for the solar cells to be corrosion-resistant, which can be rapidly assessed using the method presented in this work.

Potential‐induced electrochemical corrosion in crystalline silicon solar cells

Silicon Rich Carbide As A Conductive Substrate For Si Qd Solar Cells

Accelerated damp-heat testing at the cell-level of bifacial silicon HJT, PERC and TOPCon solar cells using sodium chloride

Insight into Al–Si Interface of PERC by Kelvin Probe Force Microscopy

Aluminum Gettering in Photovoltaic Silicon

Effects Of Electrolytic Parameters On The Deposition Of Boron At The Cathode During Molten Salt Electrolysis Of Silicon

Addressing sodium ion-related degradation in SHJ cells by the application of nano-scale barrier layers

Improved performance on multi-crystalline silicon solar cells by optimizing aluminum back surface field process

Electro-analytical investigation of potential induced degradation in mc-silicon solar cells: case of sodium ion induced inductive loop

Al-Si contact formation involving back surface field and voids of PERC

Aluminum-Doped Crystalline Silicon and Its Photovoltaic Application

Corrosive Behavior of Silver Electrode in Inverted Perovskite Solar Cells Based on Cu:NiO X

An Industrial Solution to Light-Induced Degradation of Crystalline Silicon Solar Cells

Efficiency improvement of PERC solar cell using an aluminum oxide passivation layer prepared via spatial atomic layer deposition and post-annealing

Study on Annealing Process of Aluminum Oxide Passivation Layer for PERC Solar Cells

Characterization of rear-side potential-induced degradation in bifacial p-PERC solar modules

Monocrystalline Silicon PERC Solar Cell with Rear-Side AlOx Film Formed by Furnace Oxidation

Sulfur-enhanced surface passivation for hole-selective contacts in crystalline silicon solar cells

Influence of Al2O3/SiNx Rear-Side Stacked Passivation on the Performance of Polycrystalline PERC Solar Cells

In Operando Monitoring the Stress Evolution of Silicon Anode Electrodes during Battery Operation via Optical Fiber Sensors

An Investigation on a Crystalline-Silicon Solar Cell with Black Silicon Layer at the Rear.