Abstract:Crystalline n-type silicon (n-Si) solar cells are emerging as promising candidates to overcome the efficiency limitations of current p-type technologies, such as PERC cells. This article explores recent advances in passivation and metallisation techniques for monocrystalline n-Si solar cells, focusing on their impact on improving conversion efficiency and reducing manufacturing costs. The paper begins with a discussion of the importance of base material quality for n-Si cells. The impact of metallic impurities, oxide precipitates and thermal donors on minority carrier lifetime is analysed, as well as n-type silicon purification and passivation strategies, such as gettering. Next, the paper explores different contact passivation technologies, including silicon heterojunctions (SHJs), poly-Si and tunnel oxide TOPCon/POLO contacts, and metal oxide and organic compound contacts. The performance, advantages and manufacturing challenges of each technology are compared and discussed. Metallization techniques such as silver screen printing and more cost-effective and sustainable alternatives such as screen printing and copper plating are also examined. The impact of plating technologies on the performance of bifacial cells is also discussed. The paper then looks at n-Si bifacial solar cells and their potential to increase the energy efficiency of PV systems. Different bifacial cell concepts and their performance under real-world conditions are discussed, as well as the challenges and opportunities for their future development. Silicon-based tandem and multifunction solar cells are presented as a promising way to overcome the efficiency limits of single-junction cells. Perovskite-silicon tandems and III-V/silicon tandems, with their respective advantages and challenges, are examined in detail. Finally, the article discusses the economic and environmental aspects of n-type PV technologies, including cost of ownership (COO), discounted cost of energy (LCOE) and life cycle assessment (LCA). The importance of improving efficiency and reducing material use for the economic viability and sustainability of n-Si solar cells is highlighted. In conclusion, the paper highlights the crucial role of n-Si solar cells for the energy transition and highlights the opportunities and challenges for their development and large-scale deployment in the future.

Passivating Contacts for Crystalline Silicon Solar Cells: An Overview of the Current Advances and Future Perspectives

Passivating contacts for high-efficiency silicon-based solar cells: From single-junction to tandem architecture

Recent advancements in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells: Technology review and perspectives

Progress and Future Prospects of Wide‐Bandgap Metal‐Compound‐Based Passivating Contacts for Silicon Solar Cells

The Development of Carbon/Silicon Heterojunction Solar Cells through Interface Passivation

Conductive Hole-Selective Passivating Contacts for Crystalline Silicon Solar Cells

Solution‐Processed Electron‐Selective Contacts Enabling 21.8% Efficiency Crystalline Silicon Solar Cells

Mass production of crystalline silicon solar cells with polysilicon‐based passivating contacts: An industrial perspective

Interfacial Engineering of Cu 2 O Passivating Contact for Efficient Crystalline Silicon Solar Cells with an Al 2 O 3 Passivation Layer

Advancements in Passivation and Metallization Techniques for n-Type Monocrystalline Silicon Solar Cells

Unraveling the Passivation Mechanisms of C-Si/Siox/Poly-Si Contacts

Silicon‐based passivating contacts: The TOPCon route

Toward Efficiency Limits of Crystalline Silicon Solar Cells: Recent Progress in High‐Efficiency Silicon Heterojunction Solar Cells

Current status and challenges for hole-selective poly-silicon based passivating contacts

Crystalline Silicon (c-Si)-Based Tunnel Oxide Passivated Contact (TOPCon) Solar Cells: A Review

Design and Optimization of SiOx/AZO Transparent Passivating Contacts for High‐Efficiency Crystalline Silicon Solar Cells

Dopant‐Free and Carrier‐Selective Heterocontacts for Silicon Solar Cells: Recent Advances and Perspectives

Application of Phosphorus‐Doped Polysilicon‐Based Full‐Area Passivating Contact on the Front Textured Surface of P‐type Silicon

Sulfur-enhanced surface passivation for hole-selective contacts in crystalline silicon solar cells

Key Success Factors and Future Perspective of Silicon-Based Solar Cells

Significant Improvement of Passivation Performance by Two-Step Preparation of Amorphous Silicon Passivation Layers in Silicon Heterojunction Solar Cells*