Abstract:Passivating contact solar cells have gradually become the mainstream cell technology due to their excellent performance, and further improving the conversion efficiency has become a focus of subsequent research. Typically, achieving excellent field-effect passivation and low contact resistivity in doped polycrystalline silicon (poly-Si) solar cells requires heavy phosphorus doping. However, this approach can lead to a predicament where excessive phosphorus diffuses into the Si substrate during annealing, causing recombination losses. To address this challenge, a tandem passivation contact structure incorporating an intrinsic amorphous silicon (a-Si ( i)) film within the passivation layers is introduced to retard the diffusion of phosphorus into the Si substrate. Comprehensive characterizations of the tandem structure were carried out to delve into the underlying mechanisms of films with the integrated a-Si ( i) layer, including simulations, surface microscopy, active dopants profiling, crystallographic structure, chemical bonding, elemental distribution, and electrical properties. Simulations revealed that the inserted intrinsic layer effectively counteracts the clustering of phosphorus atoms, leading to a more even distribution during crystal growth. Furthermore, active dopant profiles indicate the potential of the introduced a-Si ( i) layer to tailor the in-diffused dopant profile. Microscopy investigations revealed the occurrence of blistering when the a-Si ( i) thickness exceeds 30 nm. Passivation and contact performances of TOPCon solar cells were assessed as the a-Si ( i) thickness was varied. Notably, optimal electrical properties were achieved with 20 nm a-Si ( i) thickness. At this thickness, the implied open-circuit voltage ( iV) of the hydrogenated lifetime sample was promoted to more than 736.6 mV on the polished wafer, corresponding to the lowest single-side saturation current density ( J) of 4.3 fA/cm . In addition, a low contact resistivity of 1.4 mΩ·cm was achieved. Based on this tandem passivation contact structure, industrial-sized TOPCon solar cells were fabricated, giving an average efficiency of 23.83%, 0.25% higher than that of the baseline counterparts on the production line. The above results demonstrate the role of the a-Si ( i) film as a buffer layer, retarding the diffusion of phosphorus into the Si substrate and obtaining a better passivation effect. This enables us to further tailor the doping profile for high-efficiency solar cells. Our work thus highlights a promising strategy to improve the performance of TOPCon solar cells and showcases its potential for implementation in industrial manufacturing.

Conductive Hole-Selective Passivating Contacts for Crystalline Silicon Solar Cells

A High-Quality Dopant-Free Electron-Selective Passivating Contact Made from Ultra-Low Concentration Water Solution

Progress and Future Prospects of Wide‐Bandgap Metal‐Compound‐Based Passivating Contacts for Silicon Solar Cells

Interfacial Engineering of Cu 2 O Passivating Contact for Efficient Crystalline Silicon Solar Cells with an Al 2 O 3 Passivation Layer

Design Rule of Electron- and Hole-Selective Contacts for Polycrystalline Silicon-Based Passivating Contact Solar Cells

A silicon oxide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 23%

Conductive Passivator for Efficient Monolithic Perovskite/Silicon Tandem Solar Cell on Commercially Textured Silicon

Polysilicon Passivating Contacts for Silicon Solar Cells: Interface Passivation and Carrier Transport Mechanism

Passivating Contacts for Crystalline Silicon Solar Cells: An Overview of the Current Advances and Future Perspectives

Solution-Doped Polysilicon Passivating Contacts for Silicon Solar Cells

Ultrathin Self-Assembled Monolayer for Effective Silicon Solar Cell Passivation

Sulfur-enhanced surface passivation for hole-selective contacts in crystalline silicon solar cells

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency

Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films

Novel Tandem Passivated Contact Approach for High-Efficiency Industrial TOPCon Solar Cells

Current status and challenges for hole-selective poly-silicon based passivating contacts

Enhancing poly-Si contact through a highly conductive and ultra-thin TiN layer for high-efficiency passivating contact silicon solar cells

Effective Hydrogenation Strategies to Boost Efficiency over 20% for Crystalline Silicon Solar Cell with Al2O3/Cu2O Passivating Contact

A Polymer/Carbon‐Nanotube Ink as a Boron‐Dopant/Inorganic‐Passivation Free Carrier Selective Contact for Silicon Solar Cells with over 21% Efficiency

PEDOT:PSS-Nafion/n-Si Hybrid Heterojunction TOPCon Solar Cells: Experiment and Simulation

Unraveling the Passivation Mechanisms of C-Si/Siox/Poly-Si Contacts